FUNCTION value_limit_type

(* SCHEMA step_merged_ap_schema; *)

-- IN AP242
FUNCTION value_limit_type
      (iv : shape_data_quality_value_limit_type_select ) : SET OF STRING;
   LOCAL
      retval : SET OF STRING := [];
   END_LOCAL;
      IF 'STEP_MERGED_AP_SCHEMA.SHAPE_DATA_QUALITY_VALUE_RANGE' IN TYPEOF(iv) THEN
         retval := TYPEOF(iv\compound_representation_item.item_element[1].value_component);
      END_IF;
      IF 'STEP_MERGED_AP_SCHEMA.SHAPE_DATA_QUALITY_VALUE_LIMIT' IN TYPEOF(iv) THEN
         IF 'STEP_MERGED_AP_SCHEMA.MEASURE_WITH_UNIT' IN TYPEOF(iv) THEN
            retval := TYPEOF(iv\measure_with_unit.value_component);
         END_IF;
      END_IF;
      RETURN (retval);
END_FUNCTION;

Referenced By

Defintion value_limit_type is references by the following definitions:

Definition	Type
a3ma_get_value_limit_type	FUNCTION
a3ms_get_value_limit_type	FUNCTION
curve_with_excessive_segments	ENTITY
curve_with_small_curvature_radius	ENTITY
edge_with_excessive_segments	ENTITY
excessively_high_degree_curve	ENTITY
excessively_high_degree_surface	ENTITY
extreme_patch_width_variation	ENTITY
face_surface_with_excessive_patches_in_one_direction	ENTITY
g1_discontinuity_between_adjacent_faces	ENTITY
g1_discontinuous_curve	ENTITY
g1_discontinuous_surface	ENTITY
g2_discontinuity_between_adjacent_faces	ENTITY
g2_discontinuous_curve	ENTITY
g2_discontinuous_surface	ENTITY
gap_between_adjacent_edges_in_loop	ENTITY
gap_between_edge_and_base_surface	ENTITY
gap_between_faces_related_to_an_edge	ENTITY
gap_between_pcurves_related_to_an_edge	ENTITY
gap_between_vertex_and_base_surface	ENTITY
gap_between_vertex_and_edge	ENTITY
high_degree_axi_symmetric_surface	ENTITY
high_degree_conic	ENTITY
high_degree_linear_curve	ENTITY
high_degree_planar_surface	ENTITY
indistinct_curve_knots	ENTITY
indistinct_surface_knots	ENTITY
multiply_defined_cartesian_points	ENTITY
multiply_defined_curves	ENTITY
multiply_defined_directions	ENTITY
multiply_defined_edges	ENTITY
multiply_defined_faces	ENTITY
multiply_defined_placements	ENTITY
multiply_defined_solids	ENTITY
multiply_defined_surfaces	ENTITY
multiply_defined_vertices	ENTITY
nearly_degenerate_surface_boundary	ENTITY
nearly_degenerate_surface_patch	ENTITY
over_used_vertex	ENTITY
partly_overlapping_curves	ENTITY
partly_overlapping_edges	ENTITY
partly_overlapping_faces	ENTITY
partly_overlapping_solids	ENTITY
partly_overlapping_surfaces	ENTITY
short_length_curve	ENTITY
short_length_curve_segment	ENTITY
short_length_edge	ENTITY
small_area_face	ENTITY
small_area_surface	ENTITY
small_area_surface_patch	ENTITY
small_volume_solid	ENTITY
solid_with_excessive_number_of_voids	ENTITY
steep_angle_between_adjacent_edges	ENTITY
steep_angle_between_adjacent_faces	ENTITY
surface_with_excessive_patches_in_one_direction	ENTITY
surface_with_small_curvature_radius	ENTITY
unused_patches	ENTITY
validate_accuracy_types	FUNCTION
zero_surface_normal	ENTITY

[Top Level Definitions] [Exit]

Generated by STEP Tools® EXPRESS to HTML Converter
2025-09-04T17:14:54-04:00