Integrated generic resource: Geometric and topological representation ISO 10303-42:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Geometry
   4.1 General
   4.2 Fundamental concepts and assumptions
   4.3 Geometry constant definition
   4.4 Geometry type definitions
   4.5 Geometry entity definitions
   4.6 Geometry function definitions
   4.7 Geometry rule definitions
5 Topology
   5.1 General
   5.2 Fundamental concepts and assumptions
   5.3 Topology constant definition
   5.4 Topology type definitions
   5.5 Topology entity definitions
   5.6 Topology function definitions
6 Geometric model
   6.1 General
   6.2 Fundamental concepts and assumptions
   6.3 Geometric model type definitions
   6.4 Geometric model entity definitions
   6.5 Geometric model function definitions
7 Scan data 3d shape model
   7.1 General
   7.2 Fundamental concepts and assumptions
   7.3 Scan data 3d shape model type definition
   7.4 Scan data 3d shape model entity definitions
   7.5 Scan data 3d shape model function definitions

A Short names of entities
B Information object registration
C Computer interpretable listings
D EXPRESS-G diagrams
E Change history
Bibliography
Index

Index of Express-G pagesFirst pagePrevious pageNext pageLast page
Figure D.12 — EXPRESS-G diagram of the geometry_schema (12 of 16) ../../../data/resource_docs/geometric_and_topological_representation/sys/4_schema.htm#geometry_schema.b_spline_surface_with_knots ../../../data/resource_docs/geometric_and_topological_representation/sys/4_schema.htm#geometry_schema.uniform_surface ../../../data/resource_docs/geometric_and_topological_representation/sys/4_schema.htm#geometry_schema.quasi_uniform_surface ../../../data/resource_docs/geometric_and_topological_representation/sys/4_schema.htm#geometry_schema.bezier_surface ../../../data/resource_docs/geometric_and_topological_representation/sys/4_schema.htm#geometry_schema.trimmed_surface ../../../data/resource_docs/geometric_and_topological_representation/sys/4_schema.htm#geometry_schema.knot_type ../../../data/resource_docs/geometric_and_topological_representation/sys/4_schema.htm#geometry_schema.rational_b_spline_surface ../../../data/resource_docs/geometric_and_topological_representation/sys/4_schema.htm#geometry_schema.b_spline_surface ../../../data/resource_docs/geometric_and_topological_representation/sys/4_schema.htm#geometry_schema.b_spline_surface_form ./geometry_schemaexpg3.htm


Figure D.12 — EXPRESS-G diagram of the geometry_schema (12 of 16)


© ISO 2021 — All rights reserved