Integrated generic resource: Geometric and topological representation ISO 10303-42:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Geometry
   4.1 General
   4.2 Fundamental concepts and assumptions
   4.3 Geometry constant definition
   4.4 Geometry type definitions
   4.5 Geometry entity definitions
   4.6 Geometry function definitions
   4.7 Geometry rule definitions
5 Topology
   5.1 General
   5.2 Fundamental concepts and assumptions
   5.3 Topology constant definition
   5.4 Topology type definitions
   5.5 Topology entity definitions
   5.6 Topology function definitions
6 Geometric model
   6.1 General
   6.2 Fundamental concepts and assumptions
   6.3 Geometric model type definitions
   6.4 Geometric model entity definitions
   6.5 Geometric model function definitions
7 Scan data 3d shape model
   7.1 General
   7.2 Fundamental concepts and assumptions
   7.3 Scan data 3d shape model type definition
   7.4 Scan data 3d shape model entity definitions
   7.5 Scan data 3d shape model function definitions

A Short names of entities
B Information object registration
C Computer interpretable listings
D EXPRESS-G diagrams
E Change history
Bibliography
Index

Annex C
(informative)

Computer interpretable listings

This annex references a listing of the EXPRESS entity names and corresponding short names as specified or referenced in this document. It also provides a listing of each EXPRESS schema specified in this document without comments or other explanatory text. These listings are available in computer-interpretable form in Table C.1 and can be found at the following URLs:

   Short names: http://standards.iso.org/iso/10303/tech/short_names/short-names.txt
   EXPRESS: http://standards.iso.org/iso/10303/smrl/v9/tech/smrlv9.zip

Table C.1 — EXPRESS listings

HTML file ASCII file
geometry_schema.htm geometry_schema.exp
topology_schema.htm topology_schema.exp
geometric_model_schema.htm geometric_model_schema.exp
scan_data_3d_shape_model_schema.htm scan_data_3d_shape_model_schema.exp

NOTE  The information provided in computer-interpretable form at the above URLs is informative. The information that is contained in the body of this document is normative.



© ISO 2021 — All rights reserved