Integrated application resource: Mechanical features ISO 10303-113:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Counterbore countersink
   4.1 General
   4.2 Fundamental concepts and assumptions
   4.3 Counterbore countersink type definitions
   4.4 Counterbore countersink entity definitions
   4.5 Counterbore countersink subtype constraint definition
5 Machining feature
   5.1 General
   5.2 Fundamental concepts and assumptions
   5.3 Machining feature type definition
   5.4 Machining feature entity definitions
   5.5 Machining feature subtype constraint definition
   5.6 Machining feature rule definitions
6 Mechanical design
   6.1 General
   6.2 Fundamental concepts and assumptions
   6.3 Mechanical design type definitions
   6.4 Mechanical design entity definitions
   6.5 Mechanical design function definitions
   6.6 Mechanical design rule definitions

A Short names of entities
B Information object registration
C Computer interpretable listings
D EXPRESS-G diagrams
E Technical discussion
F Change history
Bibliography
Index

Index of Express-G pagesFirst pagePrevious pageNext pageLast page
Figure D.4 — EXPRESS-G diagram of the counterbore_countersink_schema (4 of 5) ./counterbore_countersink_schemaexpg2.htm ./counterbore_countersink_schemaexpg2.htm ./counterbore_countersink_schemaexpg2.htm ./counterbore_countersink_schemaexpg2.htm ./counterbore_countersink_schemaexpg5.htm ./counterbore_countersink_schemaexpg2.htm ./counterbore_countersink_schemaexpg2.htm ./counterbore_countersink_schemaexpg5.htm ../../resources/shape_tolerance_schema/shape_tolerance_schema.htm#shape_tolerance_schema.tolerance_value ../../resources/measure_schema/measure_schema.htm#measure_schema.positive_plane_angle_measure_with_unit ../../resources/measure_schema/measure_schema.htm#measure_schema.positive_length_measure_with_unit ../../resources/measure_schema/measure_schema.htm#measure_schema.positive_plane_angle_measure_with_unit ../../resources/shape_tolerance_schema/shape_tolerance_schema.htm#shape_tolerance_schema.tolerance_value ../../resources/shape_tolerance_schema/shape_tolerance_schema.htm#shape_tolerance_schema.tolerance_value ../../resources/measure_schema/measure_schema.htm#measure_schema.positive_length_measure_with_unit ../../resources/measure_schema/measure_schema.htm#measure_schema.positive_length_measure_with_unit ../../resources/measure_schema/measure_schema.htm#measure_schema.positive_length_measure_with_unit ../../resources/measure_schema/measure_schema.htm#measure_schema.positive_length_measure_with_unit ../../resources/shape_tolerance_schema/shape_tolerance_schema.htm#shape_tolerance_schema.tolerance_value ../../../data/resource_docs/mechanical_features/sys/4_schema.htm#counterbore_countersink_schema.countersink_hole_definition ../../../data/resource_docs/mechanical_features/sys/4_schema.htm#counterbore_countersink_schema.simplified_counterdrill_hole_definition ../../../data/resource_docs/mechanical_features/sys/4_schema.htm#counterbore_countersink_schema.simplified_countersink_hole_definition ../../../data/resource_docs/mechanical_features/sys/4_schema.htm#counterbore_countersink_schema.counterdrill_hole_definition


Figure D.4 — EXPRESS-G diagram of the counterbore_countersink_schema (4 of 5)


© ISO 2021 — All rights reserved