Application module: Model based 3D geometrical dimensioning and tolerancing representation ISO/TS 10303-1816:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM rule definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Contents

1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms
4 Information requirements
    4.1 Required AM ARMs
    4.2 ARM type definitions
          4.2.1 mb3dgdt_additional_application_domain_enumeration
          4.2.2 mb3gdtsr_dimension_target
          4.2.3 mb3gdtsr_edge_of_undefined_shape_size_element
          4.2.4 mb3gdtsr_geometric_tolerance_target
          4.2.5 nominal_3d_derived_feature_geometry
          4.2.6 nominal_3d_integral_feature_geometry
    4.3 ARM entity definitions
          4.3.1 Nominal_3d_derived_feature
          4.3.2 Nominal_3d_edge
          4.3.3 Nominal_3d_feature
          4.3.4 Nominal_3d_integral_feature
    4.4ARM rule definition

          4.4.1 gdt_representation_view_context_constraint
5 Module interpreted model
    5.1 Mapping specification
          5.1.1 Edge_of_undefined_shape_size
          5.1.2 Dimensional_location
          5.1.3 Dimensional_size
          5.1.4 Geometric_tolerance
          5.1.5 Edge_of_undefined_shape_size
          5.1.6 Nominal_3d_derived_feature
          5.1.7 Nominal_3d_edge
          5.1.8 Nominal_3d_feature
          5.1.9 Nominal_3d_integral_feature
    5.2 MIM EXPRESS short listing
      5.2.1 MIM type definition
          5.2.1.1 mb3dgdtr_geometric_model_item
Annex A MIM short names
Annex B Information object registration
   B.1 Document identification
   B.2 Schema identification
Annex C ARM EXPRESS-G
Annex D MIM EXPRESS-G
Annex E Computer interpretable listings
Annex F Change history
      F.1 General
      F 2 Changes made in edition 2
            F 2.1 Summary of changes
            F 2.2 Changes made to the ARM
            F 2.3 Changes made to the mapping
Bibliography
Index

Figures

Figure C.1 — ARM schema level EXPRESS-G diagram 1 of 1
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1
Figure D.1 — MIM schema level EXPRESS-G diagram 1 of 1
Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1

Tables

Table E.1 — ARM and MIM EXPRESS listings


© ISO 2018 — All rights reserved