Application module: Default tolerance ISO/TS 10303-1052:2014-02(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition
     5.2.2 MIM entity definitions
     5.2.3 MIM function definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Application module implementation and usage guide
G Change history
Bibliography
Index

Index

cell_entry_select
   ARM object definition 4.2.1
   ARM EXPRESS-G C.2
Default_setting_association_arm
   ARM interface 4.1
Default_setting_association_mim
   MIM interface 5.2
default_tolerance_table
   MIM object definition 5.2.2.1
   MIM EXPRESS-G D.2
default_tolerance_table_cell
   MIM object definition 5.2.2.2
   MIM EXPRESS-G D.2
default_tolerance_table_cell_wr2
   MIM object definition 5.2.3.1
default_tolerance_table_cell_wr3
   MIM object definition 5.2.3.2
default_tolerance_table_cell_wr4
   MIM object definition 5.2.3.3
default_tolerance_table_cell_wr5
   MIM object definition 5.2.3.4
Document_assignment_arm
   ARM interface 4.1
Document_assignment_mim
   MIM interface 5.2
dt_document_reference_item
   MIM object definition 5.2.1.1
   MIM EXPRESS-G D.2
Foundation_representation_arm
   ARM interface 4.1
Foundation_representation_mim
   MIM interface 5.2
General_tolerance_table
   ARM object definition 4.3.1
   ARM EXPRESS-G C.2
   mapping specification 5.1.1
general_tolerance_table_select
   ARM object definition 4.2.2
   ARM EXPRESS-G C.2
General_tolerances
   ARM object definition 4.3.2
   ARM EXPRESS-G C.2
   mapping specification 5.1.2
limit_select
   ARM object definition 4.2.3
   ARM EXPRESS-G C.2
Measure_representation_arm
   ARM interface 4.1
Measure_representation_mim
   MIM interface 5.2
Number_of_decimal_places
   ARM object definition 4.3.3
   ARM EXPRESS-G C.2
   mapping specification 5.1.4
Plus_minus_toleranced_datum
   ARM object definition 4.3.4
   ARM EXPRESS-G C.2
   mapping specification 5.1.3
representation_schema
   MIM interface 5.2
Significant_number_of_digits
   ARM object definition 4.3.5
   ARM EXPRESS-G C.2
   mapping specification 5.1.5
Tolerance_table_cell
   ARM object definition 4.3.6
   ARM EXPRESS-G C.2
   mapping specification 5.1.6
Upper_lower_limit
   ARM object definition 4.3.7
   ARM EXPRESS-G C.2
   mapping specification 5.1.7
Upper_lower_toleranced_datum
   ARM object definition 4.3.8
   ARM EXPRESS-G C.2
   mapping specification 5.1.8


© ISO 2014 — All rights reserved