| Definition | Type |
|---|
| agc_with_dimension | ENTITY |
| box_rotate_angle | REAL |
| box_slant_angle | REAL |
| conical_stepped_hole_transition | ENTITY |
| conical_surface | ENTITY |
| convert_plane_angle_for_pair_from_radian | FUNCTION |
| convert_spatial_to_ypr_rotation | FUNCTION |
| cyclide_segment_solid | ENTITY |
| cylindrical_pair_value | ENTITY |
| cylindrical_pair_with_range | ENTITY |
| cylindrical_point | ENTITY |
| derive_angle | FUNCTION |
| equivalence_measured_value_select | SELECT |
| extruded_face_solid_with_draft_angle | ENTITY |
| extruded_face_solid_with_multiple_draft_angles | ENTITY |
| fill_area_style_hatching | ENTITY |
| gear_pair | ENTITY |
| gear_pair_value | ENTITY |
| gear_pair_with_range | ENTITY |
| inconsistent_curve_transition_code | ENTITY |
| inconsistent_surface_transition_code | ENTITY |
| low_order_kinematic_pair_value | ENTITY |
| low_order_kinematic_pair_with_range | ENTITY |
| measure_value | SELECT |
| planar_pair_value | ENTITY |
| planar_pair_with_range | ENTITY |
| plane_angle_and_length_pair | ENTITY |
| plane_angle_and_ratio_pair | ENTITY |
| plane_angle_for_pair_in_radian | FUNCTION |
| point_on_planar_curve_pair_with_range | ENTITY |
| point_on_surface_pair_with_range | ENTITY |
| polar_point | ENTITY |
| positive_plane_angle_measure | REAL |
| rack_and_pinion_pair_value | ENTITY |
| revolute_pair_value | ENTITY |
| revolute_pair_with_range | ENTITY |
| revolved_area_solid | ENTITY |
| revolved_face_solid | ENTITY |
| right_circular_cone | ENTITY |
| rolling_surface_pair_value | ENTITY |
| rotational_range_measure | SELECT |
| rotation_about_direction | ENTITY |
| screw_pair_value | ENTITY |
| screw_pair_with_range | ENTITY |
| sliding_surface_pair_value | ENTITY |
| solid_with_circular_pattern | ENTITY |
| solid_with_groove | ENTITY |
| solid_with_pocket | ENTITY |
| solid_with_protrusion | ENTITY |
| solid_with_trapezoidal_section_slot | ENTITY |
| spherical_pair_with_pin_and_range | ENTITY |
| spherical_pair_with_range | ENTITY |
| spherical_point | ENTITY |
| surface_pair_with_range | ENTITY |
| su_parameters | ENTITY |
| transformation_with_derived_angle | ENTITY |
| trim_condition_select | SELECT |
| universal_pair | ENTITY |
| universal_pair_value | ENTITY |
| universal_pair_with_range | ENTITY |
| ypr_rotation | AGGREGATE |