Integrated application resource: Kinematics ISO 10303-105:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms
4 Kinematic property
   4.1 General
   4.2 Fundamental concepts and assumptions
   4.3 Kinematic property entity definitions
   4.4 Kinematic property subtype constraint definition

5 Kinematic topology
   5.1 General
   5.2 Fundamental concepts and assumptions
   5.3 Kinematic topology type definition
   5.4 Kinematic topology entity definitions
   5.5 Kinematic topology subtype constraint definition
   5.6 Kinematic topology function definitions
6 Kinematic structure
   6.1 General
   6.2 Fundamental concepts and assumptions
   6.3 Kinematic structure type definitions
   6.4 Kinematic structure entity definitions
   6.5 Kinematic structure subtype constraint definition
   6.6 Kinematic structure function definitions

7 Kinematic state
   7.1 General
   7.2 Fundamental concepts and assumptions
   7.3 Kinematic state type definitions
   7.4 Kinematic state entity definitions
   7.5 Kinematic state subtype constraint definition
   7.6 Kinematic state function definitions
8 Kinematic motion representation
   8.1 General
   8.2 Fundamental concepts and assumptions
   8.3 Kinematic motion representation type definitions
   8.4 Kinematic motion representation entity definitions
   8.5 Kinematic motion representation subtype constraint definitions
9 Kinematic analysis control and result
   9.1 General
   9.2 Fundamental concepts and assumptions
   9.3 Kinematic analysis control and result type definitions
   9.4 Kinematic analysis control and result entity definitions
   9.5 Kinematic analysis control and result subtype constraint definition
A Short names of entities
B Information object registration
C Computer interpretable listings
D EXPRESS-G diagrams
E Technical discussion
F Change history
Bibliography
Index

Annex A
(normative)

Short names of entities

Requirements on the use of the short names are found in the implementation methods included in ISO 10303. EXPRESS entity names and the equivalent short names are available from:

http://standards.iso.org/iso/10303/tech/short_names/short-names.txt



© ISO 2019 — All rights reserved