Application interpreted construct: Draughting elements ISO 10303-506:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 EXPRESS short listing
   4.1 General
   4.2 Fundamental concepts and assumptions
   4.3 Draughting elements entity definitions

A Short names of entities
B Information object registration
C Computer interpretable listings
D EXPRESS-G diagrams
E Change history
Bibliography
Index

Contents

1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms
4 EXPRESS short listing
     4.1 General
     4.2 Fundamental concepts and assumptions
     4.3 Draughting elements entity definitions
          4.3.1 angular_dimension
          4.3.2 curve_dimension
          4.3.3 datum_feature_callout
          4.3.4 datum_target_callout
          4.3.5 diameter_dimension
          4.3.6 dimension_callout_component_relationship
          4.3.7 dimension_callout_relationship
          4.3.8 dimension_pair
          4.3.9 draughting_elements
          4.3.10 geometrical_tolerance_callout
          4.3.11 leader_directed_dimension
          4.3.12 linear_dimension
          4.3.13 ordinate_dimension
          4.3.14 radius_dimension
          4.3.15 structured_dimension_callout
Annex A Short names of entities
Annex B Information object registration
   B.1 Document identification
   B.2 Schema identification
Annex C Computer interpretable listings
Annex D EXPRESS-G diagrams
Annex E Change history
      E.1 General
      E 2 Changes made in edition 2
            E 2.1 Summary of changes
            E 2.3 Changes made to schema aic_draughting_elements
      E 3 Changes made in edition 3
            E 3.1 Summary of changes
Bibliography
Index

Figures

Figure 1 — Angular and radius dimensions
Figure 2 — Curve dimension
Figure 3 — Draughting callouts
Figure 4 — Diameter dimension
Figure 5 — Structured dimension callout
Figure 6 — Parallel dimension pair
Figure 7 — Chain dimension pair
Figure 8 — Leader directed dimension
Figure 9 — Ordinate dimension
Figure D.1 — EXPRESS-G diagram of the aic_draughting_elements (1 of 2)
Figure D.2 — EXPRESS-G diagram of the aic_draughting_elements (2 of 2)

Tables

Table A.1 Short names of entities


© ISO 2018 — All rights reserved