Application module: Symbolization by schematic element ISO/TS 10303-1209:2005(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
Bibliography
Index

3 Terms, definitions and abbreviations

3.1 Terms defined in ISO 10303-1

For the purposes of this document, the following terms defined in ISO 10303-1 apply:

3.2 Terms defined in ISO 10303-202

For the purposes of this document, the following terms defined in ISO 10303-202 apply:

3.3 Terms defined in ISO/TS 10303-1001

For the purposes of this document, the following terms defined in ISO/TS 10303-1001 apply:

3.4 Terms defined in ISO/TS 10303-1017

For the purposes of this document, the following terms defined in ISO/TS 10303-1017 apply:

3.5 Terms defined in ISO 10303-54

For the purposes of this document, the following terms defined in ISO 10303-54 apply:

3.6 Abbreviations

For the purposes of this document, the following abbreviations apply:

AM application module
ARM application reference model
MIM module interpreted model
URL uniform resource locator


© ISO 2005 — All rights reserved