Application module: Package ISO/TS 10303-1707:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
   4.5 ARM function definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definitions
     5.2.3 MIM subtype constraint definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

3 Terms, definitions and abbreviated terms

3.1 Terms and definitions

3.1.1 Terms defined in ISO 10303-1

For the purposes of this document, the following terms defined in ISO 10303-1 apply:

3.1.2 Other terms and definitions

For the purposes of this document, the following terms and definitions apply:

3.1.2.1
black-box model

model of an item for which there is not internal physical structure available to support detailed thermal or mechanical evaluation or manufacture

3.1.2.2
white-box model

model of an item for which there is some internal physical structure available to support detailed thermal or mechanical evaluation but insufficient detail for manufacture

3.2 Abbreviated terms

For the purposes of this document, the following abbreviated terms apply:

AM application module
AP application protocol
ARM application reference model
MIM module interpreted model
URL uniform resource locator


© ISO 2018 — All rights reserved