Application module: Mechanical design presentation representation with draughting ISO/TS 10303-1315:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition
     5.2.2 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

2 Normative references

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 10303-1,  Industrial automation systems and integration — Product data representation and exchange — Part 1: Overview and fundamental principles

ISO 10303-11,  Industrial automation systems and integration — Product data representation and exchange — Part 11: Description methods: The EXPRESS language reference manual

ISO 10303-43,  Industrial automation systems and integration — Product data representation and exchange — Part 43: Integrated generic resource: Representation structures

ISO/TS 10303-1023,  Industrial automation systems and integration — Product data representation and exchange — Part 1023: Application module: Part view definition

ISO/TS 10303-1311,  Industrial automation systems and integration — Product data representation and exchange — Part 1311: Application module: Associative draughting elements

ISO/TS 10303-1313,  Industrial automation systems and integration — Product data representation and exchange — Part 1313: Application module: Mechanical design geometric presentation

ISO/TS 10303-1314,  Industrial automation systems and integration — Product data representation and exchange — Part 1314: Application module: Mechanical design shaded presentation

ISO/TS 10303-1805,  Industrial automation systems and integration — Product data representation and exchange — Part 1805: Application module: Characterized representation



© ISO 2018 — All rights reserved