Application module: Mechanical design features and requirements ISO/TS 10303-1846:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM function definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious pageNext pageLast page
Figure C.5 — ARM entity level EXPRESS-G diagram 4 of 6 ./armexpg4.htm ./armexpg4.htm ./armexpg3.htm ./armexpg2.htm ./armexpg3.htm ./armexpg3.htm ../shape_property_assignment/sys/4_info_reqs.htm#shape_property_assignment_arm.shape_element ../assembly_structure/sys/4_info_reqs.htm#assembly_structure_arm.multi_level_reference_designator ../assembly_structure/sys/4_info_reqs.htm#assembly_structure_arm.multi_level_reference_designator ../assembly_structure/sys/4_info_reqs.htm#assembly_structure_arm.multi_level_reference_designator ../assembly_structure/sys/4_info_reqs.htm#assembly_structure_arm.multi_level_reference_designator ../mechanical_design_features_and_requirements/sys/4_info_reqs.htm#mechanical_design_features_and_requirements_arm.md_countersink_hole_occurrence_in_assembly ../mechanical_design_features_and_requirements/sys/4_info_reqs.htm#mechanical_design_features_and_requirements_arm.md_counterdrill_hole_occurrence ../mechanical_design_features_and_requirements/sys/4_info_reqs.htm#mechanical_design_features_and_requirements_arm.md_counterbore_hole_occurrence_in_assembly ../mechanical_design_features_and_requirements/sys/4_info_reqs.htm#mechanical_design_features_and_requirements_arm.basic_round_hole_occurrence ../mechanical_design_features_and_requirements/sys/4_info_reqs.htm#mechanical_design_features_and_requirements_arm.md_countersink_hole_occurrence ../mechanical_design_features_and_requirements/sys/4_info_reqs.htm#mechanical_design_features_and_requirements_arm.md_counterdrill_hole_occurrence_in_assembly ../mechanical_design_features_and_requirements/sys/4_info_reqs.htm#mechanical_design_features_and_requirements_arm.basic_round_hole_occurrence_in_assembly ../mechanical_design_features_and_requirements/sys/4_info_reqs.htm#mechanical_design_features_and_requirements_arm.spotface_occurrence_in_assembly ../mechanical_design_features_and_requirements/sys/4_info_reqs.htm#mechanical_design_features_and_requirements_arm.md_counterbore_hole_occurrence ../mechanical_design_features_and_requirements/sys/4_info_reqs.htm#mechanical_design_features_and_requirements_arm.spotface_occurrence


Figure C.5 — ARM entity level EXPRESS-G diagram 4 of 6


© ISO 2021 — All rights reserved