Application module: General surface appearance ISO/TS 10303-1007:2010-07(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM type definition
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Index

Boundary_curve_appearance
   ARM object definition 4.3.1
   ARM EXPRESS-G C.2
   mapping specification 5.1.1
Control_grid_appearance
   ARM object definition 4.3.2
   ARM EXPRESS-G C.2
   mapping specification 5.1.2
Curve_appearance_arm
   ARM interface 4.1
Curve_appearance_mim
   MIM interface 5.2
Parameter_line_appearance
   ARM object definition 4.3.3
   ARM EXPRESS-G C.2
   mapping specification 5.1.3
presentation_appearance_schema
   MIM interface 5.2
Segmentation_curve_appearance
   ARM object definition 4.3.4
   ARM EXPRESS-G C.2
   mapping specification 5.1.4
Silhouette_curve_appearance
   ARM object definition 4.3.5
   ARM EXPRESS-G C.2
   mapping specification 5.1.5
Surface_appearance
   ARM object definition 4.3.6
   ARM EXPRESS-G C.2
   mapping specification 5.1.6
Surface_appearance_element
   ARM object definition 4.3.7
   ARM EXPRESS-G C.2
   mapping specification 5.1.7
Surface_colour
   ARM object definition 4.3.8
   ARM EXPRESS-G C.2
   mapping specification 5.1.8
Surface_related_curve_appearance
   ARM object definition 4.3.9
   ARM EXPRESS-G C.2
   mapping specification 5.1.9
surface_side
   ARM object definition 4.2.1
   ARM EXPRESS-G C.2


© ISO 2010 — All rights reserved