Application module: Draughting element ISO/TS 10303-1310:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Contents

1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms
4 Information requirements
    4.1 Required AM ARMs
    4.2 ARM type definitions
          4.2.1 annotation_plane_element
          4.2.2 de_appearance_select
          4.2.3 draughting_callout_content_select
          4.2.4 plane_or_planar_box
    4.3 ARM entity definitions
          4.3.1 Annotation_fill_area
          4.3.2 Annotation_plane
          4.3.3 Dimension_curve
          4.3.4 Dimension_curve_directed_callout
          4.3.5 Draughting_callout
          4.3.6 Fill_area
          4.3.7 Generic_annotation_curve
          4.3.8 Leader
          4.3.9 Leader_directed_callout
          4.3.10 Projection_curve
          4.3.11 Projection_directed_callout
    4.4 ARM subtype constraint definition
          4.4.1 annotation_curve_subtypes
5 Module interpreted model
    5.1 Mapping specification
          5.1.1 Annotation_fill_area
          5.1.2 Annotation_plane
          5.1.3 Appearance_assignment
          5.1.4 Dimension_curve
          5.1.5 Dimension_curve_directed_callout
          5.1.6 Draughting_callout
          5.1.7 Fill_area
          5.1.8 Generic_annotation_curve
          5.1.9 Leader
          5.1.10 Leader_directed_callout
          5.1.11 Projection_curve
          5.1.12 Projection_directed_callout
          5.1.13 annotation_curve_subtypes
    5.2 MIM EXPRESS short listing
Annex A MIM short names
Annex B Information object registration
   B.1 Document identification
   B.2 Schema identification
Annex C ARM EXPRESS-G
Annex D MIM EXPRESS-G
Annex E Computer interpretable listings
Annex F Change history
      F.1 General
      F 2 Changes made in edition 2
            F 2.1 Summary of changes
      F 3 Changes made in edition 3
            F 3.1 Summary of changes
            F 3.2 Changes made to the ARM
      F 4 Changes made in edition 4
            F 4.1 Summary of changes
            F 4.2 Changes made to the ARM
      F 5 Changes made in edition 5
            F 5.1 Summary of changes
            F 5.2 Changes made to the ARM
            F 5.3 Changes made to the MIM
Bibliography
Index

Figures

Figure 1 — Components of a dimension in a drawing
Figure 2 — Draughting callouts on a drawing
Figure 3 — Fill area styles
Figure C.1 — ARM schema level EXPRESS-G diagram 1 of 1
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1
Figure D.1 — MIM schema level EXPRESS-G diagram 1 of 1

Tables

Table E.1 — ARM and MIM EXPRESS listings


© ISO 2021 — All rights reserved