Application module: Dimension and tolerance callouts ISO/TS 10303-1362:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesNext pageLast page
Figure D.1 — MIM schema level EXPRESS-G diagram 1 of 1 ../associative_draughting_elements/mimexpg1.htm ../../resources/product_property_definition_schema/product_property_definition_schema.htm ../value_with_unit/mimexpg1.htm ../draughting_annotation/mimexpg1.htm ../../resources/presentation_resource_schema/presentation_resource_schema.htm ../appearance_assignment/mimexpg1.htm ../basic_geometry/mimexpg1.htm ../geometric_tolerance/mimexpg1.htm ../../resources/mechanical_design_schema/mechanical_design_schema.htm ../draughting_element_specialisations/mimexpg1.htm ../elemental_geometric_shape/mimexpg1.htm ../../resources/draughting_element_schema/draughting_element_schema.htm ../../resources/geometry_schema/geometry_schema.htm ../../resources/presentation_definition_schema/presentation_definition_schema.htm ../associative_text/mimexpg1.htm ../../resources/shape_tolerance_schema/shape_tolerance_schema.htm


Figure D.1 — MIM schema level EXPRESS-G diagram 1 of 1


© ISO 2019 — All rights reserved