Application module: Design product data management ISO/TS 10303-1628:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM rule definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesNext pageLast page
Figure C.1 — ARM schema level EXPRESS-G diagram                         1 of 1 ../information_rights/armexpg1.htm ../requirement_assignment/armexpg1.htm ../design_material_aspects/armexpg1.htm ../classification_with_attributes/armexpg1.htm ../specification_control/armexpg1.htm ../pre_defined_product_data_management_specializations/armexpg1.htm ../design_product_data_management/armexpg2.htm ../test_select_product/armexpg1.htm ../attribute_classification/armexpg1.htm ../requirement_view_definition_relationship/armexpg1.htm ../characterizable_object/armexpg1.htm ../activity_method_assignment/armexpg1.htm ../product_data_management/armexpg1.htm ../item_definition_structure/armexpg1.htm ../manufacturing_configuration_effectivity/armexpg1.htm


Figure C.1 — ARM schema level EXPRESS-G diagram 1 of 1


© ISO 2021 — All rights reserved