Application module: Default setting association ISO/TS 10303-1809:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Index

Default_chamfer
   ARM object definition 4.2.1
   ARM EXPRESS-G C.2
   mapping specification 5.1.1
Default_draft_angle
   ARM object definition 4.2.2
   ARM EXPRESS-G C.2
   mapping specification 5.1.2
Default_edge_round
   ARM object definition 4.2.3
   ARM EXPRESS-G C.2
   mapping specification 5.1.3
Default_fillet
   ARM object definition 4.2.4
   ARM EXPRESS-G C.2
   mapping specification 5.1.4
Default_shape_property
   ARM object definition 4.2.5
   ARM EXPRESS-G C.2
   mapping specification 5.1.5
Default_thickness
   ARM object definition 4.2.6
   ARM EXPRESS-G C.2
   mapping specification 5.1.6
Shape_property_assignment_arm
   ARM interface 4.1
Shape_property_assignment_mim
   MIM interface 5.2
Value_with_unit_extension_arm
   ARM interface 4.1
Value_with_unit_extension_mim
   MIM interface 5.2


© ISO 2018 — All rights reserved