Application module: Additive manufacturing part and build information ISO/TS 10303-1835:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definition
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions
     5.2.2 MIM rule definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Application module implementation and usage guide
G Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesNext pageLast page
Figure D.1 — MIM schema level EXPRESS-G diagram 1 of 1 ../additive_manufacturing_part_and_build_information/mimexpg2.htm ../item_definition_structure/mimexpg1.htm ../assembly_structure/mimexpg1.htm ../part_shape/mimexpg1.htm ../../resources/product_structure_schema/product_structure_schema.htm ../foundation_representation/mimexpg1.htm ../../resources/shape_aspect_definition_schema/shape_aspect_definition_schema.htm ../process_plan/mimexpg1.htm ../elemental_geometric_shape/mimexpg1.htm ../construction_geometry/mimexpg1.htm ../value_with_unit_extension/mimexpg1.htm ../part_view_definition/mimexpg1.htm


Figure D.1 — MIM schema level EXPRESS-G diagram 1 of 1


© ISO 2019 — All rights reserved