Application module: Product version ISO/TS 10303-1018:2004(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM entity definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
Bibliography
Index

4 Information requirements

This clause specifies the information requirements for the Product version application module. The information requirements are specified as the Application Reference Model (ARM) of this application module.

NOTE 1  A graphical representation of the information requirements is given in Annex C.

NOTE 2  The mapping specification is specified in 5.1. It shows how the information requirements are met by using common resources and constructs defined or imported in the MIM schema of this application module.

The following EXPRESS specification begins the Product_version_arm schema and identifies the necessary external references.

EXPRESS specification:

*)
SCHEMA Product_version_arm;
(*

4.1 Required AM ARM

The following EXPRESS interface statement specifies the elements imported from the ARM of another application module.

EXPRESS specification:

*)
USE FROM Product_identification_arm;    --  ISO/TS 10303-1017
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Product_identification_arm ISO/TS 10303-1017

NOTE 2   See Annex C, Figures C.1and C.2 for a graphical representation of this schema.

4.2 ARM entity definition

This subclause specifies the ARM entity for this module. The ARM entity is an atomic element that embodies a unique application concept and contains attributes specifying the data elements of the entity. The ARM entity and definition is specified below.

4.2.1 Product_version   EXPRESS-GMapping table

A Product_version is a revision of a Product. It is a collector of the definitions of this revision of the Product.

NOTE    The set of all instances of Product_version of the same Product represents the history of the product.

EXPRESS specification:

*)
ENTITY Product_version;
  id : STRING;
  description : OPTIONAL STRING;
  of_product : Product;
END_ENTITY;
(*

Attribute definitions:

id: the identifier for the Product_version.

description: the text that provides further information about the Product_version. The value of this attribute need not be specified.

of_product: the Product, the Product_version identifies a version of.



*)
END_SCHEMA;  -- Product_version_arm
(*


© ISO 2004 — All rights reserved