5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

• use of a supertype entity does not make applicable any of its specializations, unless the specialization is also imported in the MIM schema;
• use of a SELECT type does not make applicable any of its listed types unless the listed type is also imported in the MIM schema.

Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.

USE FROM Independent_property_representation_mim;    --  ISO/TS 10303-1038



USE FROM Product_view_definition_mim;    --  ISO/TS 10303-1019



USE FROM material_property_definition_schema    --  ISO 10303-45
  (material_designation,
   material_designation_characterization,
   material_property);



USE FROM material_property_representation_schema    --  ISO 10303-45
  (data_environment,
   material_property_representation);
(*



NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Independent_property_representation_mim	ISO/TS 10303-1038
Product_view_definition_mim	ISO/TS 10303-1019
material_property_definition_schema	ISO 10303-45
material_property_representation_schema	ISO 10303-45

NOTE 2   See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM entity definition

This subclause specifies the MIM entity for this module. The MIM entity and definition is specified below.

5.2.1.1 general_material_property   

EXPRESS specification:

*)
ENTITY general_material_property
  SUBTYPE OF (general_property);
WHERE
  WR1: SIZEOF( QUERY( gpa <* USEDIN(SELF,'PRODUCT_PROPERTY_DEFINITION_SCHEMA.GENERAL_PROPERTY_ASSOCIATION.BASE_DEFINITION') | NOT ('MATERIAL_PROPERTY_DEFINITION_SCHEMA.MATERIAL_PROPERTY' IN TYPEOF(gpa\general_property_association.derived_definition)) )) = 0;
END_ENTITY;
(*

Formal propositions:

WR1: A general_material_property may only be referenced as the base_definition by general_property_association instances which reference as derived_definition a property_definition of type material_property.

© ISO 2018 — All rights reserved