Application module: Draughting element ISO/TS 10303-1310:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Annex A
(normative)

MIM short names

Requirements on the use of the short names are found in the implementation methods included in ISO 10303. EXPRESS entity names and the equivalent short names are available from:

http://standards.iso.org/iso/10303/tech/short_names/short-names.txt



© ISO 2021 — All rights reserved