Application module: Certification ISO/TS 10303-1044:2004(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations

4 Information requirements
   4.1 ARM type definition
   4.2 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition
     5.2.2 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

EXPRESS specification:

*)
SCHEMA Certification_mim;

USE FROM basic_attribute_schema    --  ISO 10303-41
  (role_association,
   role_select);

USE FROM certification_schema    --  ISO 10303-41
  (certification,
   certification_type);

USE FROM management_resources_schema    --  ISO 10303-41
  (certification_assignment);
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

basic_attribute_schema ISO 10303-41
certification_schema ISO 10303-41
management_resources_schema ISO 10303-41

NOTE 2   See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM type definition

This subclause specifies the MIM type for this application module. The MIM type and definition is specified below.

5.2.1.1 certification_item   EXPRESS-G

The certification_item type is an extensible list of alternate data types. Additional alternate data types are specified in select data types that extend the certification_item type.

NOTE   This empty extensible select requires extension in a further module to ensure that entities that refer to it have at least one valid instantiation.

EXPRESS specification:

*)
TYPE certification_item = EXTENSIBLE GENERIC_ENTITY SELECT;
END_TYPE;
(*

5.2.2 MIM entity definition

This subclause specifies the MIM entity for this module. The MIM entity and definition is specified below.

5.2.2.1 applied_certification_assignment   EXPRESS-G

An applied_certification_assignment is a type of certification_assignment. It assigns a certification to activity or product data.

EXPRESS specification:

*)
ENTITY applied_certification_assignment
  SUBTYPE OF (certification_assignment);
  items : SET[1:?] OF certification_item;
END_ENTITY;
(*

Attribute definitions:

items: the set of items s to which the certification is assigned.



*)
END_SCHEMA;  -- Certification_mim
(*


© ISO 2004 — All rights reserved