Application module: Specified product ISO/TS 10303-1104:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition
     5.2.2 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../product_class/sys/4_info_reqs.htm#product_class_arm.specification ../configuration_item/sys/4_info_reqs.htm#configuration_item_arm.product_configuration ../product_class/sys/4_info_reqs.htm#product_class_arm.product_class ../product_version/sys/4_info_reqs.htm#product_version_arm.product_version ../configuration_item/sys/4_info_reqs.htm#configuration_item_arm.item_design_association ../support_resource/sys/4_info_reqs.htm#support_resource_arm.label ../characterizable_object/sys/4_info_reqs.htm#characterizable_object_arm.characterizable_object ../product_view_definition/sys/4_info_reqs.htm#product_view_definition_arm.product_shape_type_enumeration ../specified_product/sys/4_info_reqs.htm#specified_product_arm.specification_based_product_version ../specified_product/sys/4_info_reqs.htm#specified_product_arm.product_specification


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2021 — All rights reserved