Application module: Product placement ISO/TS 10303-1343:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../product_occurrence/sys/4_info_reqs.htm#product_occurrence_arm.single_instance ../physical_breakdown/sys/4_info_reqs.htm#physical_breakdown_arm.physical_element_definition ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.geometric_model ../contextual_shape_positioning/sys/4_info_reqs.htm#contextual_shape_positioning_arm.template_instance ../physical_breakdown/sys/4_info_reqs.htm#physical_breakdown_arm.physical_element_definition ../product_placement/sys/4_info_reqs.htm#product_placement_arm.occurrence_placement ../product_placement/sys/4_info_reqs.htm#product_placement_arm.physical_element_placement ../product_placement/sys/4_info_reqs.htm#product_placement_arm.part_occurrence_placement


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved