Application module: Manifold surface ISO/TS 10303-1509:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM type definition
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../manifold_surface/sys/4_info_reqs.htm#manifold_surface_arm.manifold_surface_shape_representation_item ../elemental_topology/sys/4_info_reqs.htm#elemental_topology_arm.connected_face_set ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.geometric_placement_operation ../elemental_topology/sys/4_info_reqs.htm#elemental_topology_arm.connected_face_set ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.geometric_model ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.axis_placement_3d ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.detailed_geometric_model_element ../manifold_surface/sys/4_info_reqs.htm#manifold_surface_arm.shell_based_surface_model ../manifold_surface/sys/4_info_reqs.htm#manifold_surface_arm.open_shell ../manifold_surface/sys/4_info_reqs.htm#manifold_surface_arm.manifold_surface_shape_representation


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved