Application module: Kinematic state ISO/TS 10303-1798:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
   4.5 ARM function definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious pageNext pageLast page
Figure C.3 — ARM entity level EXPRESS-G diagram 2 of 3 ./armexpg2.htm ./armexpg2.htm ./armexpg2.htm ./armexpg2.htm ./armexpg2.htm ./armexpg2.htm ./armexpg2.htm ./armexpg2.htm ./armexpg2.htm ../value_with_unit/sys/4_info_reqs.htm#value_with_unit_arm.plane_angle_measure ../value_with_unit/sys/4_info_reqs.htm#value_with_unit_arm.plane_angle_measure ../value_with_unit/sys/4_info_reqs.htm#value_with_unit_arm.plane_angle_measure ../basic_geometry/sys/4_info_reqs.htm#basic_geometry_arm.point_on_curve ../kinematic_structure/sys/4_info_reqs.htm#kinematic_structure_arm.point_on_planar_curve_pair ../value_with_unit/sys/4_info_reqs.htm#value_with_unit_arm.length_measure ../kinematic_structure/sys/4_info_reqs.htm#kinematic_structure_arm.prismatic_pair ../value_with_unit/sys/4_info_reqs.htm#value_with_unit_arm.length_measure ../value_with_unit/sys/4_info_reqs.htm#value_with_unit_arm.plane_angle_measure ../value_with_unit/sys/4_info_reqs.htm#value_with_unit_arm.length_measure ../value_with_unit/sys/4_info_reqs.htm#value_with_unit_arm.length_measure ../value_with_unit/sys/4_info_reqs.htm#value_with_unit_arm.plane_angle_measure ../kinematic_structure/sys/4_info_reqs.htm#kinematic_structure_arm.gear_pair ../kinematic_structure/sys/4_info_reqs.htm#kinematic_structure_arm.cylindrical_pair ../kinematic_structure/sys/4_info_reqs.htm#kinematic_structure_arm.rack_and_pinion_pair ../basic_geometry/sys/4_info_reqs.htm#basic_geometry_arm.point_on_surface ../kinematic_structure/sys/4_info_reqs.htm#kinematic_structure_arm.point_on_surface_pair ../kinematic_structure/sys/4_info_reqs.htm#kinematic_structure_arm.planar_pair ../kinematic_state/sys/4_info_reqs.htm#kinematic_state_arm.prismatic_pair_value ../kinematic_state/sys/4_info_reqs.htm#kinematic_state_arm.rack_and_pinion_pair_value ../kinematic_state/sys/4_info_reqs.htm#kinematic_state_arm.point_on_planar_curve_pair_value ../kinematic_state/sys/4_info_reqs.htm#kinematic_state_arm.planar_pair_value ../kinematic_state/sys/4_info_reqs.htm#kinematic_state_arm.cylindrical_pair_value ../kinematic_state/sys/4_info_reqs.htm#kinematic_state_arm.gear_pair_value ../kinematic_state/sys/4_info_reqs.htm#kinematic_state_arm.point_on_surface_pair_value


Figure C.3 — ARM entity level EXPRESS-G diagram 2 of 3


© ISO 2018 — All rights reserved