Application module: Geometric tolerance ISO/TS 10303-1051:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definitions
   4.5 ARM function definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions
     5.2.2 MIM function definitions
     5.2.3 MIM rule definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious pageNext pageLast page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 5 ./armexpg6.htm ./armexpg5.htm ./armexpg6.htm ./armexpg6.htm ./armexpg6.htm ./armexpg6.htm ./armexpg6.htm ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.dimensional_size ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.direction ../support_resource/sys/4_info_reqs.htm#support_resource_arm.identifier ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.dimensional_location ../shape_property_assignment/sys/4_info_reqs.htm#shape_property_assignment_arm.shape_element ../shape_property_assignment/sys/4_info_reqs.htm#shape_property_assignment_arm.shape_element ../measure_representation/sys/4_info_reqs.htm#measure_representation_arm.numerical_item_with_unit ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.geometric_coordinate_space ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.axis_placement ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.contacting_feature ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.target_curve ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.target_area ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.datum ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.datum_feature ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.target_rectangle ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.target_point ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.target_straight_line ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.target_circular_curve ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.placed_target ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.datum_target ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.dimensional_location_with_datum_feature ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.dimensional_size_with_datum_feature ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.target_circle ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.gl_shape_element_subtypes


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 5


© ISO 2019 — All rights reserved