Application module: Document and version identification ISO/TS 10303-1121:2014-02(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definitions
   4.3 ARM rule definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../product_identification/sys/4_info_reqs.htm#product_identification_arm.product ../product_version/sys/4_info_reqs.htm#product_version_arm.product_version ../document_and_version_identification/sys/4_info_reqs.htm#document_and_version_identification_arm.document ../document_and_version_identification/sys/4_info_reqs.htm#document_and_version_identification_arm.document_version


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2014 — All rights reserved