Application module: Camera view 3D ISO/TS 10303-1316:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../camera_view_3d/sys/4_info_reqs.htm#camera_view_3d_arm.cv3_view_element_select ../camera_view_3d/sys/4_info_reqs.htm#camera_view_3d_arm.clipping_element ../appearance_assignment/sys/4_info_reqs.htm#appearance_assignment_arm.appearance_assignment ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.detailed_geometric_model_element ../basic_geometry/sys/4_info_reqs.htm#basic_geometry_arm.plane ../appearance_assignment/sys/4_info_reqs.htm#appearance_assignment_arm.planar_box ../appearance_assignment/sys/4_info_reqs.htm#appearance_assignment_arm.planar_box ../colour/sys/4_info_reqs.htm#colour_arm.colour ../appearance_assignment/sys/4_info_reqs.htm#appearance_assignment_arm.presented_model_select ../presentation_hierarchy/sys/4_info_reqs.htm#presentation_hierarchy_arm.view_element_select ../camera_view_3d/sys/4_info_reqs.htm#camera_view_3d_arm.light_type ../camera_view_3d/sys/4_info_reqs.htm#camera_view_3d_arm.clipping_mode ../camera_view_3d/sys/4_info_reqs.htm#camera_view_3d_arm.view_projection_type ../camera_view_3d/sys/4_info_reqs.htm#camera_view_3d_arm.clipping_operator ../camera_view_3d/sys/4_info_reqs.htm#camera_view_3d_arm.camera_model_d3 ../camera_view_3d/sys/4_info_reqs.htm#camera_view_3d_arm.light_source ../camera_view_3d/sys/4_info_reqs.htm#camera_view_3d_arm.model_image_3d ../camera_view_3d/sys/4_info_reqs.htm#camera_view_3d_arm.cv3d_detailed_geometric_model_element_subtypes


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved