Application module: Basic geometric topology ISO/TS 10303-1323:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../basic_geometry/sys/4_info_reqs.htm#basic_geometry_arm.curve ../elemental_topology/sys/4_info_reqs.htm#elemental_topology_arm.vertex ../basic_geometry/sys/4_info_reqs.htm#basic_geometry_arm.surface ../elemental_topology/sys/4_info_reqs.htm#elemental_topology_arm.face ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.cartesian_point ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.point ../elemental_topology/sys/4_info_reqs.htm#elemental_topology_arm.loop ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.detailed_geometric_model_element ../elemental_topology/sys/4_info_reqs.htm#elemental_topology_arm.edge ../basic_geometric_topology/sys/4_info_reqs.htm#basic_geometric_topology_arm.vertex_point ../basic_geometric_topology/sys/4_info_reqs.htm#basic_geometric_topology_arm.face_surface ../basic_geometric_topology/sys/4_info_reqs.htm#basic_geometric_topology_arm.poly_loop ../basic_geometric_topology/sys/4_info_reqs.htm#basic_geometric_topology_arm.edge_curve


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2021 — All rights reserved