ISO-10303-21;
HEADER;
/* Exchange file generated using ST-DEVELOPER 1.6 */

FILE_DESCRIPTION(
/* description */ ('STEP AP203 File'),
/* implementation_level */ '2;1');

FILE_NAME(
/* name */ 'block',
/* time_stamp */ '1998-08-10T08:25:37-04:00',
/* author */ ('Name'),
/* organization */ ('STEP Tools, Inc.'),
/* preprocessor_version */ 'ST-DEVELOPER 1.6',
/* originating_system */ 'ST-ACIS',
/* authorisation */ 'Name');

FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10=PLANE('',#13);
#11=CARTESIAN_POINT('',(0.,0.,2.5));
#12=DIRECTION('',(0.,0.,1.));
#13=AXIS2_PLACEMENT_3D('',#11,#12,$);
#14=PLANE('',#17);
#15=CARTESIAN_POINT('',(1.5,0.,0.));
#16=DIRECTION('',(-1.,0.,0.));
#17=AXIS2_PLACEMENT_3D('',#15,#16,$);
#18=LINE('',#20,#21);
#19=DIRECTION('',(0.,1.,0.));
#20=CARTESIAN_POINT('',(1.5,0.,2.5));
#21=VECTOR('',#19,1.);
#22=PLANE('',#25);
#23=CARTESIAN_POINT('',(0.,2.,0.));
#24=DIRECTION('',(0.,-1.,0.));
#25=AXIS2_PLACEMENT_3D('',#23,#24,$);
#26=LINE('',#28,#29);
#27=DIRECTION('',(-1.,0.,0.));
#28=CARTESIAN_POINT('',(0.,2.,2.5));
#29=VECTOR('',#27,1.);
#30=PLANE('',#33);
#31=CARTESIAN_POINT('',(-1.5,0.,0.));
#32=DIRECTION('',(1.,0.,0.));
#33=AXIS2_PLACEMENT_3D('',#31,#32,$);
#34=LINE('',#36,#37);
#35=DIRECTION('',(0.,-1.,0.));
#36=CARTESIAN_POINT('',(-1.5,0.,2.5));
#37=VECTOR('',#35,1.);
#38=PLANE('',#41);
#39=CARTESIAN_POINT('',(0.,-2.,0.));
#40=DIRECTION('',(0.,1.,0.));
#41=AXIS2_PLACEMENT_3D('',#39,#40,$);
#42=LINE('',#44,#45);
#43=DIRECTION('',(1.,0.,0.));
#44=CARTESIAN_POINT('',(0.,-2.,2.5));
#45=VECTOR('',#43,1.);
#46=PLANE('',#49);
#47=CARTESIAN_POINT('',(0.,0.,-2.5));
#48=DIRECTION('',(0.,0.,1.));
#49=AXIS2_PLACEMENT_3D('',#47,#48,$);
#50=LINE('',#52,#53);
#51=DIRECTION('',(0.,-1.,0.));
#52=CARTESIAN_POINT('',(1.5,0.,-2.5));
#53=VECTOR('',#51,1.);
#54=LINE('',#56,#57);
#55=DIRECTION('',(-1.,0.,0.));
#56=CARTESIAN_POINT('',(0.,-2.,-2.5));
#57=VECTOR('',#55,1.);
#58=LINE('',#60,#61);
#59=DIRECTION('',(0.,1.,0.));
#60=CARTESIAN_POINT('',(-1.5,0.,-2.5));
#61=VECTOR('',#59,1.);
#62=LINE('',#64,#65);
#63=DIRECTION('',(1.,0.,0.));
#64=CARTESIAN_POINT('',(0.,2.,-2.5));
#65=VECTOR('',#63,1.);
#66=LINE('',#68,#69);
#67=DIRECTION('',(0.,0.,-1.));
#68=CARTESIAN_POINT('',(-1.5,-2.,0.));
#69=VECTOR('',#67,1.);
#70=LINE('',#72,#73);
#71=DIRECTION('',(0.,0.,-1.));
#72=CARTESIAN_POINT('',(1.5,-2.,0.));
#73=VECTOR('',#71,1.);
#74=LINE('',#76,#77);
#75=DIRECTION('',(0.,0.,-1.));
#76=CARTESIAN_POINT('',(-1.5,2.,0.));
#77=VECTOR('',#75,1.);
#78=LINE('',#80,#81);
#79=DIRECTION('',(0.,0.,-1.));
#80=CARTESIAN_POINT('',(1.5,2.,0.));
#81=VECTOR('',#79,1.);
#82=MANIFOLD_SOLID_BREP('',#83);
#83=CLOSED_SHELL('',(#84,#107,#130,#141,#150,#159));
#84=ADVANCED_FACE('',(#85),#10,.T.);
#85=FACE_BOUND('',#86,.T.);
#86=EDGE_LOOP('',(#87,#94,#99,#104));
#87=ORIENTED_EDGE('',*,*,#88,.T.);
#88=EDGE_CURVE('',#90,#92,#89,.T.);
#89=INTERSECTION_CURVE('',#18,(#10,#14),.CURVE_3D.);
#90=VERTEX_POINT('',#91);
#91=CARTESIAN_POINT('',(1.5,-2.,2.5));
#92=VERTEX_POINT('',#93);
#93=CARTESIAN_POINT('',(1.5,2.,2.5));
#94=ORIENTED_EDGE('',*,*,#95,.T.);
#95=EDGE_CURVE('',#92,#97,#96,.T.);
#96=INTERSECTION_CURVE('',#26,(#10,#22),.CURVE_3D.);
#97=VERTEX_POINT('',#98);
#98=CARTESIAN_POINT('',(-1.5,2.,2.5));
#99=ORIENTED_EDGE('',*,*,#100,.T.);
#100=EDGE_CURVE('',#97,#102,#101,.T.);
#101=INTERSECTION_CURVE('',#34,(#10,#30),.CURVE_3D.);
#102=VERTEX_POINT('',#103);
#103=CARTESIAN_POINT('',(-1.5,-2.,2.5));
#104=ORIENTED_EDGE('',*,*,#105,.T.);
#105=EDGE_CURVE('',#102,#90,#106,.T.);
#106=INTERSECTION_CURVE('',#42,(#10,#38),.CURVE_3D.);
#107=ADVANCED_FACE('',(#108),#46,.F.);
#108=FACE_BOUND('',#109,.T.);
#109=EDGE_LOOP('',(#110,#117,#122,#127));
#110=ORIENTED_EDGE('',*,*,#111,.T.);
#111=EDGE_CURVE('',#113,#115,#112,.T.);
#112=INTERSECTION_CURVE('',#50,(#46,#14),.CURVE_3D.);
#113=VERTEX_POINT('',#114);
#114=CARTESIAN_POINT('',(1.5,2.,-2.5));
#115=VERTEX_POINT('',#116);
#116=CARTESIAN_POINT('',(1.5,-2.,-2.5));
#117=ORIENTED_EDGE('',*,*,#118,.T.);
#118=EDGE_CURVE('',#115,#120,#119,.T.);
#119=INTERSECTION_CURVE('',#54,(#46,#38),.CURVE_3D.);
#120=VERTEX_POINT('',#121);
#121=CARTESIAN_POINT('',(-1.5,-2.,-2.5));
#122=ORIENTED_EDGE('',*,*,#123,.T.);
#123=EDGE_CURVE('',#120,#125,#124,.T.);
#124=INTERSECTION_CURVE('',#58,(#46,#30),.CURVE_3D.);
#125=VERTEX_POINT('',#126);
#126=CARTESIAN_POINT('',(-1.5,2.,-2.5));
#127=ORIENTED_EDGE('',*,*,#128,.T.);
#128=EDGE_CURVE('',#125,#113,#129,.T.);
#129=INTERSECTION_CURVE('',#62,(#46,#22),.CURVE_3D.);
#130=ADVANCED_FACE('',(#131),#38,.F.);
#131=FACE_BOUND('',#132,.T.);
#132=EDGE_LOOP('',(#133,#136,#137,#140));
#133=ORIENTED_EDGE('',*,*,#134,.T.);
#134=EDGE_CURVE('',#102,#120,#135,.T.);
#135=INTERSECTION_CURVE('',#66,(#38,#30),.CURVE_3D.);
#136=ORIENTED_EDGE('',*,*,#118,.F.);
#137=ORIENTED_EDGE('',*,*,#138,.F.);
#138=EDGE_CURVE('',#90,#115,#139,.T.);
#139=INTERSECTION_CURVE('',#70,(#38,#14),.CURVE_3D.);
#140=ORIENTED_EDGE('',*,*,#105,.F.);
#141=ADVANCED_FACE('',(#142),#30,.F.);
#142=FACE_BOUND('',#143,.T.);
#143=EDGE_LOOP('',(#144,#147,#148,#149));
#144=ORIENTED_EDGE('',*,*,#145,.T.);
#145=EDGE_CURVE('',#97,#125,#146,.T.);
#146=INTERSECTION_CURVE('',#74,(#30,#22),.CURVE_3D.);
#147=ORIENTED_EDGE('',*,*,#123,.F.);
#148=ORIENTED_EDGE('',*,*,#134,.F.);
#149=ORIENTED_EDGE('',*,*,#100,.F.);
#150=ADVANCED_FACE('',(#151),#22,.F.);
#151=FACE_BOUND('',#152,.T.);
#152=EDGE_LOOP('',(#153,#156,#157,#158));
#153=ORIENTED_EDGE('',*,*,#154,.T.);
#154=EDGE_CURVE('',#92,#113,#155,.T.);
#155=INTERSECTION_CURVE('',#78,(#22,#14),.CURVE_3D.);
#156=ORIENTED_EDGE('',*,*,#128,.F.);
#157=ORIENTED_EDGE('',*,*,#145,.F.);
#158=ORIENTED_EDGE('',*,*,#95,.F.);
#159=ADVANCED_FACE('',(#160),#14,.F.);
#160=FACE_BOUND('',#161,.T.);
#161=EDGE_LOOP('',(#162,#163,#164,#165));
#162=ORIENTED_EDGE('',*,*,#138,.T.);
#163=ORIENTED_EDGE('',*,*,#111,.F.);
#164=ORIENTED_EDGE('',*,*,#154,.F.);
#165=ORIENTED_EDGE('',*,*,#88,.F.);
#166=(
GEOMETRIC_REPRESENTATION_CONTEXT(3)
GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#167))
GLOBAL_UNIT_ASSIGNED_CONTEXT((#168,#169,#174))
REPRESENTATION_CONTEXT('ID1','3D')
);
#167=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-06),#174,'closure
',
'Maximum model space distance between geometric entities at asserted co
nnectivities');
#168=(
NAMED_UNIT(*)
SI_UNIT($,.STERADIAN.)
SOLID_ANGLE_UNIT()
);
#169=(
CONVERSION_BASED_UNIT('DEGREES',#170)
NAMED_UNIT(#171)
PLANE_ANGLE_UNIT()
);
#170=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.01745329252),#172);
#171=DIMENSIONAL_EXPONENTS(0.,0.,0.,0.,0.,0.,0.);
#172=(
NAMED_UNIT(*)
PLANE_ANGLE_UNIT()
SI_UNIT($,.RADIAN.)
);
#173=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#82),#166);
#174=(
LENGTH_UNIT()
NAMED_UNIT(*)
SI_UNIT(.MILLI.,.METRE.)
);
#175=SHAPE_DEFINITION_REPRESENTATION(#176,#173);
#176=PRODUCT_DEFINITION_SHAPE('Version','Test Part',#231);
#177=PRODUCT('1','Product','Test Part',(#178));
#178=MECHANICAL_CONTEXT('3D Mechanical Parts',#179,'mechanical');
#179=APPLICATION_CONTEXT(
'configuration controlled 3d designs of mechanical parts and assemblies
');
#180=APPLICATION_PROTOCOL_DEFINITION('International Standard',
'config_control_design',1994,#179);
#181=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','detail',(#177));
#182=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#183,#186,(#177));
#183=PERSON_AND_ORGANIZATION(#184,#185);
#184=PERSON('1','Last Name','First Name',$,$,$);
#185=ORGANIZATION('STI','R&D','R&D');
#186=PERSON_AND_ORGANIZATION_ROLE('design_owner');
#187=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('Version',
'Test Part',#177,.MADE.);
#188=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#189,#192,(#187));
#189=PERSON_AND_ORGANIZATION(#190,#191);
#190=PERSON('2','Last Name','First Name',$,$,$);
#191=ORGANIZATION('STI','R&D','R&D');
#192=PERSON_AND_ORGANIZATION_ROLE('creator');
#193=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#189,#194,(#187));
#194=PERSON_AND_ORGANIZATION_ROLE('design_supplier');
#195=CC_DESIGN_APPROVAL(#196,(#187));
#196=APPROVAL(#197,'Version approval');
#197=APPROVAL_STATUS('not_yet_approved');
#198=APPROVAL_DATE_TIME(#199,#196);
#199=DATE_AND_TIME(#200,#201);
#200=CALENDAR_DATE(1997,1,1);
#201=LOCAL_TIME(0,0,0.,#202);
#202=COORDINATED_UNIVERSAL_TIME_OFFSET(5,0,.BEHIND.);
#203=APPROVAL_PERSON_ORGANIZATION(#205,#196,#204);
#204=APPROVAL_ROLE('Version approval');
#205=PERSON_AND_ORGANIZATION(#206,#207);
#206=PERSON('3','Last Name','First Name',$,$,$);
#207=ORGANIZATION('STI','R&D','R&D');
#208=CC_DESIGN_SECURITY_CLASSIFICATION(#209,(#187));
#209=SECURITY_CLASSIFICATION('Version','Security for version',#210);
#210=SECURITY_CLASSIFICATION_LEVEL('unclassified');
#211=CC_DESIGN_APPROVAL(#212,(#209));
#212=APPROVAL(#213,'Version Security approval');
#213=APPROVAL_STATUS('not_yet_approved');
#214=APPROVAL_DATE_TIME(#215,#212);
#215=DATE_AND_TIME(#216,#217);
#216=CALENDAR_DATE(1997,1,1);
#217=LOCAL_TIME(0,0,0.,#202);
#218=APPROVAL_PERSON_ORGANIZATION(#220,#212,#219);
#219=APPROVAL_ROLE('Version Security approval');
#220=PERSON_AND_ORGANIZATION(#206,#221);
#221=ORGANIZATION('STI','R&D','R&D');
#222=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#223,#225,(#209));
#223=PERSON_AND_ORGANIZATION(#206,#224);
#224=ORGANIZATION('STI','R&D','R&D');
#225=PERSON_AND_ORGANIZATION_ROLE('classification_officer');
#226=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#227,#228,(#209));
#227=DATE_AND_TIME(#229,#230);
#228=DATE_TIME_ROLE('classification_date');
#229=CALENDAR_DATE(1997,1,1);
#230=LOCAL_TIME(0,0,0.,#202);
#231=PRODUCT_DEFINITION('Version','Test Part',#187,#232);
#232=DESIGN_CONTEXT('3D Mechanical Parts',#179,'design');
#233=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#234,#236,(#231));
#234=PERSON_AND_ORGANIZATION(#190,#235);
#235=ORGANIZATION('STI','R&D','R&D');
#236=PERSON_AND_ORGANIZATION_ROLE('creator');
#237=CC_DESIGN_APPROVAL(#238,(#231));
#238=APPROVAL(#239,'Definition approval');
#239=APPROVAL_STATUS('not_yet_approved');
#240=APPROVAL_DATE_TIME(#241,#238);
#241=DATE_AND_TIME(#242,#243);
#242=CALENDAR_DATE(1997,1,1);
#243=LOCAL_TIME(0,0,0.,#202);
#244=APPROVAL_PERSON_ORGANIZATION(#246,#238,#245);
#245=APPROVAL_ROLE('Definition approval');
#246=PERSON_AND_ORGANIZATION(#206,#247);
#247=ORGANIZATION('STI','R&D','R&D');
#248=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#249,#250,(#231));
#249=DATE_AND_TIME(#251,#252);
#250=DATE_TIME_ROLE('creation_date');
#251=CALENDAR_DATE(1997,1,1);
#252=LOCAL_TIME(0,0,0.,#202);
ENDSEC;
END-ISO-10303-21;