RULE machining_feature_definition_constraints

(* SCHEMA Ap242_managed_model_based_3d_engineering_mim_LF; *)

RULE machining_feature_definition_constraints FOR (feature_definition);
LOCAL
  mfds : SET OF feature_definition := [];
END_LOCAL;
  mfds := QUERY(temp <* feature_definition | 'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.MACHINING_FEATURE_DEFINITION' IN TYPEOF (temp) );
WHERE
  WR1: SIZEOF(QUERY( mfd <* mfds | NOT (SIZEOF(QUERY( pdr <*
       get_property_definition_representations (mfd) |
         'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.SHAPE_REPRESENTATION_WITH_PARAMETERS' 
       IN TYPEOF ( pdr.used_representation ) ) ) <=1 ) ) ) = 0;
  WR2: SIZEOF(QUERY( mfd <* mfds | NOT (SIZEOF (QUERY (pd <* USEDIN (mfd, 
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION.DEFINITION') |
        NOT (SIZEOF (QUERY (impl_rep <* QUERY (pdr <* USEDIN (pd,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION_REPRESENTATION.DEFINITION') |
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.SHAPE_REPRESENTATION_WITH_PARAMETERS'
        IN TYPEOF (pdr.used_representation)) |
        NOT (SIZEOF (QUERY (it <* impl_rep.used_representation.items |
        ('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PLACEMENT' 
        IN TYPEOF (it)) AND (it.name = 'orientation'))) = 1))) = 0))) = 0 ) ) ) = 0;
  WR3: SIZEOF(QUERY( mfd <* mfds | NOT ((NOT (SIZEOF(['AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.ROUND_HOLE',
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.BOSS',
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.OUTSIDE_PROFILE',
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.REMOVAL_VOLUME',
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.FLAT_FACE',
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.POCKET',
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROTRUSION',
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.RIB_TOP',
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.ROUNDED_END',
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.SLOT',
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.STEP'] * TYPEOF(mfds)) = 1))   OR 
     ((SIZEOF(QUERY(pdr <* get_property_definition_representations (mfd) | 
        ( 'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PLANAR_SHAPE_REPRESENTATION' 
        IN TYPEOF ( pdr.used_representation ) ) AND 
        ( pdr.used_representation.name ='maximum feature limit'))) >=0)) ) ) ) = 0; 
END_RULE; 

Generated by STEP Tools® EXPRESS to HTML Converter
2012-03-27T17:20:10-04:00