ENTITY hole_bottom

(* SCHEMA Ap242_managed_model_based_3d_engineering_mim_LF; *)

ENTITY hole_bottom
  SUBTYPE OF (shape_aspect);
   WHERE
    WR1: ('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.FEATURE_COMPONENT_DEFINITION' 
         IN TYPEOF(SELF.of_shape.definition));
    WR2: (SELF.description IN ['through', 'flat', 'flat with radius',
         'flat with taper','spherical', 'conical']);
    WR3: ((NOT (SELF.description = 'through')) OR 
         (SIZEOF(QUERY ( pd <* USEDIN(SELF,
         'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION.DEFINITION') | 
         (NOT (SIZEOF(USEDIN(pd,
         'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION_REPRESENTATION.DEFINITION')) = 0)) )) 
          = 0));
    WR4: ((NOT (SELF.description IN ['flat with radius', 
         'flat with taper', 'spherical','conical'])) OR 
         (SIZEOF(QUERY ( pd <* USEDIN(SELF,
         'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION.DEFINITION') | 
         (NOT (SIZEOF(QUERY ( pdr <* USEDIN(pd,
         'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION_REPRESENTATION.DEFINITION') | 
         (('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.SHAPE_REPRESENTATION_WITH_PARAMETERS') 
         IN TYPEOF(pdr.used_representation)) )) = 1)) )) = 0));
   WR5: ((NOT (SELF.description = 'flat')) OR 
        (SIZEOF(QUERY ( pd <*  USEDIN(SELF,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION.DEFINITION') | 
        (NOT (SIZEOF(QUERY ( impl_rep <* QUERY ( pdr <* USEDIN(pd,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION_REPRESENTATION.DEFINITION') | 
        (('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.SHAPE_REPRESENTATION_WITH_PARAMETERS') 
        IN TYPEOF(pdr.used_representation)) ) | 
        (NOT (SIZEOF(impl_rep.used_representation.items) = 0)) )) 
         = 0)) )) = 0));
    WR6: ((NOT (SELF.description IN ['flat with radius','spherical'])) 
        OR (SIZEOF(QUERY ( pd <* USEDIN(SELF,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION.DEFINITION') | 
        (NOT (SIZEOF(QUERY ( impl_rep <* QUERY ( pdr <* USEDIN(pd,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION_REPRESENTATION.DEFINITION') | 
        (('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.SHAPE_REPRESENTATION_WITH_PARAMETERS') 
        IN TYPEOF(pdr.used_representation)) ) | 
        (NOT (SIZEOF(impl_rep.used_representation.items) = 1)) )) 
        = 0)) )) = 0));
    WR7: ((NOT (SELF.description = 'flat with taper')) OR 
        (SIZEOF(QUERY ( pd <* USEDIN(SELF,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION.DEFINITION') | 
        (NOT (SIZEOF(QUERY ( impl_rep <* QUERY ( pdr <* USEDIN(pd,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION_REPRESENTATION.DEFINITION') | 
        (('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.SHAPE_REPRESENTATION_WITH_PARAMETERS') 
        IN TYPEOF(pdr.used_representation)) ) | 
        (NOT (SIZEOF(impl_rep.used_representation.items) = 2)) )) 
        = 0)) )) = 0));
    WR8: ((NOT (SELF.description = 'conical')) OR (SIZEOF(
        QUERY ( pd <* USEDIN(SELF,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION.DEFINITION') | 
        (NOT (SIZEOF(QUERY ( impl_rep <* QUERY ( pdr <* USEDIN(pd,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION_REPRESENTATION.DEFINITION') | 
        (('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.SHAPE_REPRESENTATION_WITH_PARAMETERS') 
        IN TYPEOF(pdr.used_representation)) ) | 
        (NOT (SIZEOF (impl_rep.used_representation.items) >= 1)
        AND  (SIZEOF (impl_rep.used_representation.items) <= 2)) )) 
        = 0)) )) = 0));
    WR9: ((SELF.description = 'through') OR 
        (SIZEOF(QUERY ( fcr <* QUERY ( sar <* USEDIN(SELF,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.SHAPE_ASPECT_RELATIONSHIP.RELATING_SHAPE_ASPECT') | 
        ((sar.description = 'hole bottom usage') AND
        ('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.FEATURE_COMPONENT_RELATIONSHIP' 
        IN TYPEOF(sar))) ) | 
        ((fcr.name IN ['hole depth start','hole depth end'])) )) >= 1));
   WR10: ((NOT (SELF.description = 'flat with radius')) OR 
        (SIZEOF(QUERY ( pd <* USEDIN(SELF,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION.DEFINITION') | 
        (NOT (SIZEOF(QUERY ( impl_rep <* QUERY ( pdr <* USEDIN(pd,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION_REPRESENTATION.DEFINITION') | 
        (('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.SHAPE_REPRESENTATION_WITH_PARAMETERS') 
        IN TYPEOF(pdr.used_representation)) ) | 
        (NOT (SIZEOF(QUERY ( it <* impl_rep.used_representation.items | 
        ((SIZEOF([
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.MEASURE_REPRESENTATION_ITEM',
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.LENGTH_MEASURE_WITH_UNIT'] * 
        TYPEOF(it)) = 2) AND (it.name = 'corner radius')))) = 1)) )) 
        = 0)) )) = 0));
    WR11: ((NOT (SELF.description = 'spherical')) OR 
        (SIZEOF(QUERY ( pd <* USEDIN(SELF,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION.DEFINITION') | 
        (NOT (SIZEOF(QUERY ( impl_rep <* QUERY ( pdr <* USEDIN(pd,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION_REPRESENTATION.DEFINITION') | 
        (('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.SHAPE_REPRESENTATION_WITH_PARAMETERS') 
        IN TYPEOF(pdr.used_representation)) ) | 
        (NOT (SIZEOF(QUERY ( it <* impl_rep.used_representation.items | 
        ((SIZEOF([
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.MEASURE_REPRESENTATION_ITEM',
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.LENGTH_MEASURE_WITH_UNIT'] *
        TYPEOF(it)) = 2) AND (it.name = 'radius')) )) = 1)) )) = 
        0)) )) = 0));
    WR12: ((NOT (SELF.description = 'conical')) OR 
        (SIZEOF(QUERY ( pd <* USEDIN(SELF,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION.DEFINITION') | 
        (NOT (SIZEOF(QUERY ( impl_rep <* QUERY ( pdr <* USEDIN(pd,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION_REPRESENTATION.DEFINITION') | 
        (('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.SHAPE_REPRESENTATION_WITH_PARAMETERS') 
        IN TYPEOF(pdr.used_representation)) ) | 
        (NOT (SIZEOF(QUERY ( it <* impl_rep.used_representation.items | 
        ((SIZEOF([
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.MEASURE_REPRESENTATION_ITEM',
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.LENGTH_MEASURE_WITH_UNIT'] *
        TYPEOF(it)) = 2) AND (it.name = 'tip radius')) )) <= 1)) )) 
        = 0)) )) = 0));
    WR13: ((NOT (SELF.description = 'conical')) OR 
        (SIZEOF(QUERY ( pd <* USEDIN(SELF,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION.DEFINITION') | 
        (NOT (SIZEOF(QUERY ( impl_rep <* QUERY ( pdr <* USEDIN(pd,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION_REPRESENTATION.DEFINITION') | 
        (('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.SHAPE_REPRESENTATION_WITH_PARAMETERS') 
        IN TYPEOF(pdr.used_representation)) ) | 
        (NOT (SIZEOF(QUERY ( it <* impl_rep.used_representation.items | 
        ((SIZEOF([
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.MEASURE_REPRESENTATION_ITEM',
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PLANE_ANGLE_MEASURE_WITH_UNIT'] *
        TYPEOF(it)) = 2) AND (it.name = 'tip angle')) )) = 1)) )) 
        = 0)) )) = 0));
    WR14: (SIZEOF(QUERY ( fcr <* QUERY ( sar <* USEDIN(SELF,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.SHAPE_ASPECT_RELATIONSHIP.RELATING_SHAPE_ASPECT') | 
        ((sar.description = 'hole bottom usage') AND
        ('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.FEATURE_COMPONENT_RELATIONSHIP' 
        IN TYPEOF(sar))) ) | 
      ((fcr.related_shape_aspect.description ='bottom condition occurrence') 
        AND ('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.ROUND_HOLE' 
        IN TYPEOF(fcr.related_shape_aspect.of_shape.definition)) AND 
        ('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.HOLE_BOTTOM' 
        IN TYPEOF(fcr.relating_shape_aspect))) 
        )) >= 1);
    WR15: ((NOT (SELF.description = 'flat with taper')) OR (SIZEOF(
        QUERY ( pd <* USEDIN(SELF,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION.DEFINITION') | 
        (NOT (SIZEOF(QUERY ( impl_rep <* QUERY ( pdr <* USEDIN(pd,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION_REPRESENTATION.DEFINITION') | 
        (('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.SHAPE_REPRESENTATION_WITH_PARAMETERS') 
        IN TYPEOF(pdr.used_representation)) ) | 
        (NOT (SIZEOF(QUERY ( it <* impl_rep.used_representation.items |  
        ((SIZEOF([
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.MEASURE_REPRESENTATION_ITEM',
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.LENGTH_MEASURE_WITH_UNIT'] *
        TYPEOF(it)) = 2) AND (it.name = 'final diameter')))) = 1)) )) 
        = 0)) )) = 0));
    WR16: ((NOT (SELF.description = 'flat with taper')) OR 
        (SIZEOF(QUERY ( pd <* USEDIN(SELF,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION.DEFINITION') | 
        (NOT (SIZEOF(QUERY ( impl_rep <* QUERY ( pdr <* USEDIN(pd,
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PROPERTY_DEFINITION_REPRESENTATION.DEFINITION') | 
        (('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.SHAPE_REPRESENTATION_WITH_PARAMETERS') 
        IN TYPEOF(pdr.used_representation)) ) | 
        (NOT (SIZEOF(QUERY ( it <* impl_rep.used_representation.items | 
        ((SIZEOF([
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.MEASURE_REPRESENTATION_ITEM',
        'AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF.PLANE_ANGLE_MEASURE_WITH_UNIT'] *
        TYPEOF(it)) = 2) AND (it.name =  'taper diameter')) )) = 1)) )) 
        = 0)) )) = 0));
 END_ENTITY; -- hole_bottom

Explicit Attributes

Entity hole_bottom has the following local and inherited explicit attributes:
AttributeTypeDefined By
 namelabel (STRING)shape_aspect
 descriptiontext (STRING)shape_aspect
 of_shapeproduct_definition_shape (ENTITY)shape_aspect
 product_definitionalLOGICALshape_aspect

Derived Attributes

Entity hole_bottom has the following local and inherited derived attributes:
AttributeTypeDefined By
 ididentifier (STRING)shape_aspect

Inverse Attributes

    No Inverse Attributes

Supertypes

Entity hole_bottom inherits from the following supertypes:
  shape_aspect

Subtypes

    No subtypes

Referenced By

Entity hole_bottom and its supertypes are referenced by the following definitions:
DefinitionTypeReferenced Entity
 action_items SELECT shape_aspect
 action_request_item SELECT shape_aspect
 acyclic_shape_aspect_relationship FUNCTION shape_aspect
 assembly_bond_definition ENTITY shape_aspect
 attribute_language_item SELECT shape_aspect
 cc_specified_item SELECT shape_aspect
 classification_item SELECT shape_aspect
 common_datum_list AGGREGATE shape_aspect
 component_feature ENTITY shape_aspect
 component_mating_constraint_condition ENTITY shape_aspect
 contacting_feature ENTITY shape_aspect
 datum ENTITY shape_aspect
 datum_feature ENTITY shape_aspect
 datum_reference_element ENTITY shape_aspect
 datum_system ENTITY shape_aspect
 datum_target ENTITY shape_aspect
 dimensional_location_with_path ENTITY shape_aspect
 dimensional_size ENTITY shape_aspect
 dimensional_size_with_path ENTITY shape_aspect
 document_reference_item SELECT shape_aspect
 draughting_model_item_definition SELECT shape_aspect
 edge_round ENTITY shape_aspect
 effectivity_item SELECT shape_aspect
 feature_for_datum_target_relationship ENTITY shape_aspect
 fillet ENTITY shape_aspect
 find_representative_shape_representation_of_shape_aspect FUNCTION shape_aspect
 find_shape_representation_of_shape_aspect FUNCTION shape_aspect
 general_datum_reference ENTITY shape_aspect
 geometric_item_specific_usage_select SELECT shape_aspect
 geometric_tolerance_target SELECT shape_aspect
 get_shape_aspects FUNCTION shape_aspect
 get_shape_aspect_property_definition_representations FUNCTION shape_aspect
 groupable_item SELECT shape_aspect
 id_attribute_select SELECT shape_aspect
 item_identified_representation_usage_definition SELECT shape_aspect
 mated_part_relationship ENTITY shape_aspect
 material_for_coating_layer RULE shape_aspect
 multi_language_attribute_item SELECT shape_aspect
 projected_zone_definition ENTITY shape_aspect
 represented_definition SELECT shape_aspect
 requirement_assigned_item SELECT shape_aspect
 requirement_source_item SELECT shape_aspect
 shape_aspect_relationship ENTITY shape_aspect
 shape_definition SELECT shape_aspect
 sts_get_product_definition_shape FUNCTION shape_aspect
 tolerance_zone_definition ENTITY shape_aspect
 unique_dimensional_location_constraint RULE shape_aspect
 unique_in_shape_aspect FUNCTION shape_aspect
 unique_shape_aspect_constraint RULE shape_aspect
 using_product_definition_of_shape_aspect FUNCTION shape_aspect
 using_shape_aspect_of_shape_representation FUNCTION shape_aspect
 valid_datum_target_parameters FUNCTION shape_aspect


[Top Level Definitions] [Exit]

Generated by STEP Tools® EXPRESS to HTML Converter
2012-03-27T17:20:07-04:00