ENTITY coaxiality_tolerance

(* SCHEMA engineering_properties_schema; *)



   ENTITY coaxiality_tolerance
   SUBTYPE OF (geometric_tolerance_with_datum_reference);
   WHERE
      WR1:
         SIZEOF(SELF\geometric_tolerance_with_datum_reference.datum_system) <= 2;
   END_ENTITY;

Explicit Attributes

Entity coaxiality_tolerance has the following local and inherited explicit attributes:

Attribute	Type	Defined By
name	label (STRING)	geometric_tolerance
description	text (STRING)	geometric_tolerance
magnitude	measure_with_unit (ENTITY)	geometric_tolerance
toleranced_shape_aspect	shape_aspect (ENTITY)	geometric_tolerance
datum_system	SET OF datum_reference (ENTITY)	geometric_tolerance_with_datum_reference

Derived Attributes

No derived attributes

Inverse Attributes

No Inverse Attributes

Supertypes

Entity coaxiality_tolerance inherits from the following supertypes:
geometric_tolerance
geometric_tolerance_with_datum_reference

Subtypes

No subtypes

Referenced By

Entity coaxiality_tolerance and its supertypes are referenced by the following definitions:

Definition	Type	Referenced Entity
angularity_tolerance	ENTITY	geometric_tolerance_with_datum_reference
coaxiality_tolerance	ENTITY	geometric_tolerance_with_datum_reference
concentricity_tolerance	ENTITY	geometric_tolerance_with_datum_reference
document_item	SELECT	geometric_tolerance
geometric_tolerance_relationship	ENTITY	geometric_tolerance
parallelism_tolerance	ENTITY	geometric_tolerance_with_datum_reference
perpendicularity_tolerance	ENTITY	geometric_tolerance_with_datum_reference
position_tolerance	ENTITY	geometric_tolerance_with_datum_reference
shape_tolerance_select	SELECT	geometric_tolerance
symmetry_tolerance	ENTITY	geometric_tolerance_with_datum_reference
tolerance_zone	ENTITY	geometric_tolerance
total_runout_tolerance	ENTITY	geometric_tolerance_with_datum_reference

[Top Level Definitions] [Exit]

Generated by STEP Tools® EXPRESS to HTML Converter
2012-03-27T17:18:50-04:00