TYPE positive_length_measure

(* SCHEMA Ap210_electronic_assembly_interconnect_and_packaging_design_mim_lf; *)

TYPE positive_length_measure = non_negative_length_measure;
WHERE
	WR1 : SELF > 0.0;
END_TYPE;

Referenced By

Defintion positive_length_measure is references by the following definitions:
DefinitionType
 block ENTITY
 box_domain ENTITY
 circle ENTITY
 circular_area ENTITY
 compute_total_depth FUNCTION
 conical_stepped_hole_transition ENTITY
 curve_style_font_pattern ENTITY
 cylindrical_surface ENTITY
 ellipse ENTITY
 elliptic_area ENTITY
 extruded_area_solid ENTITY
 extruded_face_solid ENTITY
 hyperbola ENTITY
 measure_value SELECT
 rectangular_area ENTITY
 right_angular_wedge ENTITY
 right_circular_cone ENTITY
 right_circular_cylinder ENTITY
 size_select SELECT
 solid_with_angle_based_chamfer ENTITY
 solid_with_circular_pocket ENTITY
 solid_with_circular_protrusion ENTITY
 solid_with_constant_radius_edge_blend ENTITY
 solid_with_depression ENTITY
 solid_with_double_offset_chamfer ENTITY
 solid_with_groove ENTITY
 solid_with_protrusion ENTITY
 solid_with_rectangular_pocket ENTITY
 solid_with_rectangular_protrusion ENTITY
 solid_with_single_offset_chamfer ENTITY
 solid_with_slot ENTITY
 solid_with_spherical_bottom_round_hole ENTITY
 solid_with_stepped_round_hole ENTITY
 solid_with_straight_slot ENTITY
 solid_with_tee_section_slot ENTITY
 solid_with_variable_radius_edge_blend ENTITY
 sphere ENTITY
 spherical_surface ENTITY
 swept_disk_solid ENTITY
 toroidal_surface ENTITY
 torus ENTITY
 validate_countersink_radii FUNCTION


[Top Level Definitions] [Exit]

Generated by STEP Tools® EXPRESS to HTML Converter
2012-03-27T17:15:30-04:00