ENTITY extruded_face_solid_with_trim_conditions

(* SCHEMA Ap210_electronic_assembly_interconnect_and_packaging_design_mim_lf; *)


ENTITY extruded_face_solid_with_trim_conditions
	SUPERTYPE OF (ONEOF (extruded_face_solid_with_draft_angle, extruded_face_solid_with_multiple_draft_angles))
	SUBTYPE OF (extruded_face_solid);
	first_trim_condition : trim_condition_select;
	second_trim_condition : trim_condition_select;
	first_trim_intent : trim_intent;
	second_trim_intent : trim_intent;
	first_offset : non_negative_length_measure;
	second_offset : non_negative_length_measure;
WHERE
	WR1 : NOT(('AP210_ELECTRONIC_ASSEMBLY_INTERCONNECT_AND_PACKAGING_DESIGN_MIM_LF.PLANE_ANGLE_MEASURE' 
         IN TYPEOF(first_trim_condition)) OR
         ('AP210_ELECTRONIC_ASSEMBLY_INTERCONNECT_AND_PACKAGING_DESIGN_MIM_LF.PLANE_ANGLE_MEASURE' 
         IN TYPEOF(second_trim_condition)));
	WR2 : NOT ((('AP210_ELECTRONIC_ASSEMBLY_INTERCONNECT_AND_PACKAGING_DESIGN_MIM_LF.LENGTH_MEASURE' 
         IN TYPEOF(first_trim_condition)) AND 
         ((first_trim_intent = trim_intent.offset) 
         OR (first_trim_intent = trim_intent.up_to_next))) OR  
         (('AP210_ELECTRONIC_ASSEMBLY_INTERCONNECT_AND_PACKAGING_DESIGN_MIM_LF.LENGTH_MEASURE' 
         IN TYPEOF(second_trim_condition)) AND 
         ((second_trim_intent = trim_intent.offset) 
         OR (second_trim_intent = trim_intent.up_to_next))));
	WR3 : NOT (((NOT ('AP210_ELECTRONIC_ASSEMBLY_INTERCONNECT_AND_PACKAGING_DESIGN_MIM_LF.LENGTH_MEASURE' 
         IN TYPEOF(first_trim_condition))) AND 
         ((first_trim_intent = trim_intent.blind) 
         OR (first_trim_intent = trim_intent.through_all))) OR  
         ((NOT('AP210_ELECTRONIC_ASSEMBLY_INTERCONNECT_AND_PACKAGING_DESIGN_MIM_LF.LENGTH_MEASURE' 
         IN TYPEOF(second_trim_condition))) AND 
         ((second_trim_intent = trim_intent.blind) 
         OR (second_trim_intent = trim_intent.through_all))));
	WR4 : (((first_trim_intent = trim_intent.offset) 
           AND (first_offset > 0)) XOR
         ((first_trim_intent <> trim_intent.offset) 
           AND (first_offset = 0))) AND 
         (((second_trim_intent = trim_intent.offset) 
           AND (second_offset > 0)) XOR
         ((second_trim_intent <> trim_intent.offset) 
            AND (second_offset = 0)));
	WR5 : NOT((('AP210_ELECTRONIC_ASSEMBLY_INTERCONNECT_AND_PACKAGING_DESIGN_MIM_LF.LENGTH_MEASURE' 
         IN TYPEOF(first_trim_condition)) AND
            ('AP210_ELECTRONIC_ASSEMBLY_INTERCONNECT_AND_PACKAGING_DESIGN_MIM_LF.LENGTH_MEASURE' 
         IN TYPEOF(second_trim_condition))) AND
         (first_trim_condition = second_trim_condition));
END_ENTITY;

Explicit Attributes

Entity extruded_face_solid_with_trim_conditions has the following local and inherited explicit attributes:
AttributeTypeDefined By
 namelabel (STRING)representation_item
 swept_faceface_surface (ENTITY)swept_face_solid
 extruded_directiondirection (ENTITY)extruded_face_solid
 depthpositive_length_measure (REAL)extruded_face_solid
 first_trim_conditiontrim_condition_select (SELECT)extruded_face_solid_with_trim_conditions
 second_trim_conditiontrim_condition_select (SELECT)extruded_face_solid_with_trim_conditions
 first_trim_intenttrim_intent (ENUM)extruded_face_solid_with_trim_conditions
 second_trim_intenttrim_intent (ENUM)extruded_face_solid_with_trim_conditions
 first_offsetnon_negative_length_measure (REAL)extruded_face_solid_with_trim_conditions
 second_offsetnon_negative_length_measure (REAL)extruded_face_solid_with_trim_conditions

Derived Attributes

Entity extruded_face_solid_with_trim_conditions has the following local and inherited derived attributes:
AttributeTypeDefined By
 dimdimension_count (INTEGER)geometric_representation_item

Inverse Attributes

    No Inverse Attributes

Supertypes

Entity extruded_face_solid_with_trim_conditions inherits from the following supertypes:
  representation_item
    geometric_representation_item
      solid_model
        swept_face_solid
          extruded_face_solid

Subtypes

Entity extruded_face_solid_with_trim_conditions has the following subtypes:
    extruded_face_solid_with_draft_angle*
    extruded_face_solid_with_multiple_draft_angles*
* - Immediate Subtypes

Referenced By

Entity extruded_face_solid_with_trim_conditions and its supertypes are referenced by the following definitions:
DefinitionTypeReferenced Entity
 acyclic_mapped_item_usage FUNCTION representation_item
 acyclic_solid_replica FUNCTION solid_model
 annotation_fill_area ENTITY geometric_representation_item
 annotation_plane ENTITY geometric_representation_item
 attribute_classification_item SELECT representation_item
 attribute_language_item SELECT geometric_representation_item
 axis1_placement ENTITY geometric_representation_item
 axis2_placement_2d ENTITY geometric_representation_item
 base_solid_select SELECT solid_model
 boolean_operand SELECT solid_model
 camera_model_d3 ENTITY geometric_representation_item
 cartesian_transformation_operator_2d ENTITY geometric_representation_item
 cartesian_transformation_operator_3d ENTITY geometric_representation_item
 classification_item SELECT representation_item
 default_tolerance_table_cell_wr3 FUNCTION representation_item
 default_tolerance_table_cell_wr4 FUNCTION representation_item
 default_tolerance_table_cell_wr5 FUNCTION representation_item
 degenerate_pcurve ENTITY geometric_representation_item
 dimension_of FUNCTION geometric_representation_item
 document_reference_item SELECT representation_item
 explicit_procedural_geometric_representation_item_relationship ENTITY geometric_representation_item
 externally_defined_picture_representation_item ENTITY representation_item
 extruded_face_solid ENTITY swept_face_solid
 extruded_face_solid_with_multiple_draft_angles ENTITY swept_face_solid
 founded_item_select SELECT representation_item
 gbsf_check_curve FUNCTION representation_item
 geometric_item_specific_usage ENTITY geometric_representation_item
 geometric_model_element_relationship ENTITY geometric_representation_item
 geometric_representation_item ENTITY solid_model
 groupable_item SELECT representation_item
 groupable_item SELECT geometric_representation_item
 indirectly_selected_elements ENTITY representation_item
 item_defined_transformation ENTITY representation_item
 item_identified_representation_usage ENTITY representation_item
 item_in_context FUNCTION representation_item
 layered_item SELECT representation_item
 list_representation_item AGGREGATE representation_item
 managed_design_object SELECT geometric_representation_item
 managed_design_object SELECT representation_item
 mapped_item ENTITY representation_item
 msf_curve_check FUNCTION representation_item
 multi_language_attribute_item SELECT geometric_representation_item
 nmsf_curve_check FUNCTION representation_item
 path_area_with_parameters ENTITY representation_item
 pcurve ENTITY geometric_representation_item
 positioned_sketch ENTITY geometric_representation_item
 predefined_picture_representation_item ENTITY representation_item
 primitive_2d ENTITY geometric_representation_item
 procedural_representation_sequence ENTITY representation_item
 representation ENTITY representation_item
 representation_item_relationship ENTITY representation_item
 representation_map ENTITY representation_item
 revolved_area_solid ENTITY geometric_representation_item
 revolved_area_solid ENTITY representation_item
 revolved_face_solid ENTITY representation_item
 revolved_face_solid ENTITY geometric_representation_item
 set_representation_item AGGREGATE representation_item
 shape_representation_requires_origin RULE representation_item
 solid_model ENTITY swept_face_solid
 solid_replica ENTITY geometric_representation_item
 solid_replica ENTITY solid_model
 styled_item ENTITY representation_item
 style_context_select SELECT representation_item
 subtype_exclusiveness_representation_item RULE representation_item
 surface_of_revolution ENTITY representation_item
 surface_of_revolution ENTITY geometric_representation_item
 swept_face_solid ENTITY extruded_face_solid
 trim_condition_select SELECT solid_model
 user_selected_elements ENTITY representation_item
 value_range_aggregate_rep_item FUNCTION representation_item
 value_range_wr2 FUNCTION representation_item


[Top Level Definitions] [Exit]

Generated by STEP Tools® EXPRESS to HTML Converter
2012-03-27T17:15:31-04:00