ENTITY angularity_tolerance

(* SCHEMA Ap203_configuration_controlled_3d_design_of_mechanical_parts_and_assemblies_mim_lf; *)

ENTITY angularity_tolerance 
 SUBTYPE OF ( geometric_tolerance_with_datum_reference );
 WHERE 
WR1 : 
SIZEOF (SELF\geometric_tolerance_with_datum_reference.datum_system) < 3;
 END_ENTITY;

Explicit Attributes

Entity angularity_tolerance has the following local and inherited explicit attributes:
AttributeTypeDefined By
 namelabel (STRING)geometric_tolerance
 descriptiontext (STRING)geometric_tolerance
 magnitudemeasure_with_unit (ENTITY)geometric_tolerance
 toleranced_shape_aspectshape_aspect (ENTITY)geometric_tolerance
 datum_systemSET OF datum_reference (ENTITY)geometric_tolerance_with_datum_reference

Derived Attributes

    No derived attributes

Inverse Attributes

    No Inverse Attributes

Supertypes

Entity angularity_tolerance inherits from the following supertypes:
  geometric_tolerance
    geometric_tolerance_with_datum_reference

Subtypes

    No subtypes

Referenced By

Entity angularity_tolerance and its supertypes are referenced by the following definitions:
DefinitionTypeReferenced Entity
 angularity_tolerance ENTITY geometric_tolerance_with_datum_reference
 attribute_language_item SELECT geometric_tolerance
 circular_runout_tolerance ENTITY geometric_tolerance_with_datum_reference
 coaxiality_tolerance ENTITY geometric_tolerance_with_datum_reference
 concentricity_tolerance ENTITY geometric_tolerance_with_datum_reference
 geometric_tolerance_relationship ENTITY geometric_tolerance
 line_profile_tolerance ENTITY geometric_tolerance_with_datum_reference
 line_profile_tolerance ENTITY geometric_tolerance
 multi_language_attribute_item SELECT geometric_tolerance
 parallelism_tolerance ENTITY geometric_tolerance_with_datum_reference
 perpendicularity_tolerance ENTITY geometric_tolerance_with_datum_reference
 position_tolerance ENTITY geometric_tolerance_with_datum_reference
 subtype_exclusiveness_geometric_tolerance RULE geometric_tolerance
 subtype_mandatory_geometric_tolerance RULE geometric_tolerance
 surface_profile_tolerance ENTITY geometric_tolerance_with_datum_reference
 symmetry_tolerance ENTITY geometric_tolerance_with_datum_reference
 tolerance_zone ENTITY geometric_tolerance
 total_runout_tolerance ENTITY geometric_tolerance_with_datum_reference


[Top Level Definitions] [Exit]

Generated by STEP ToolsTM EXPRESS to HTML Converter
on 2007-09-07T16:38:16-04:00