Application module: Characteristic ISO/TS 10303-1654:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definitions
   4.5 ARM function definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition
     5.2.2 MIM entity definitions
     5.2.3 MIM subtype constraint definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.3 — ARM entity level EXPRESS-G diagram 2 of 2 ../characteristic/sys/4_info_reqs.htm#characteristic_arm.c_documented_element_select ../property_assignment/sys/4_info_reqs.htm#property_assignment_arm.assigned_property ../extended_measure_representation/sys/4_info_reqs.htm#extended_measure_representation_arm.value_limit ../qualified_measure/sys/4_info_reqs.htm#qualified_measure_arm.qualified_numerical_item_with_unit ../external_source/sys/4_info_reqs.htm#external_source_arm.external_source ../document_assignment/sys/4_info_reqs.htm#document_assignment_arm.documented_element_select ../measure_representation/sys/4_info_reqs.htm#measure_representation_arm.property_value_representation ../qualified_measure/sys/4_info_reqs.htm#qualified_measure_arm.qualified_numerical_item_with_unit ../extended_measure_representation/sys/4_info_reqs.htm#extended_measure_representation_arm.value_limit ../qualified_measure/sys/4_info_reqs.htm#qualified_measure_arm.type_qualifier ../property_assignment/sys/4_info_reqs.htm#property_assignment_arm.assigned_property ../extended_measure_representation/sys/4_info_reqs.htm#extended_measure_representation_arm.value_with_tolerances ../measure_representation/sys/4_info_reqs.htm#measure_representation_arm.numerical_item_with_unit ../characteristic/sys/4_info_reqs.htm#characteristic_arm.range_class ../characteristic/sys/4_info_reqs.htm#characteristic_arm.length_tolerance_characteristic ../characteristic/sys/4_info_reqs.htm#characteristic_arm.maximum_tolerance_characteristic ../characteristic/sys/4_info_reqs.htm#characteristic_arm.statistical_tolerance_characteristic ../characteristic/sys/4_info_reqs.htm#characteristic_arm.range_characteristic ../characteristic/sys/4_info_reqs.htm#characteristic_arm.nominal_tolerance_characteristic ../characteristic/sys/4_info_reqs.htm#characteristic_arm.tolerance_characteristic ../characteristic/sys/4_info_reqs.htm#characteristic_arm.typical_tolerance_characteristic ../characteristic/sys/4_info_reqs.htm#characteristic_arm.plus_minus_tolerance_characteristic ../characteristic/sys/4_info_reqs.htm#characteristic_arm.correlated_property ../characteristic/sys/4_info_reqs.htm#characteristic_arm.qualified_tolerance_characteristic ../characteristic/sys/4_info_reqs.htm#characteristic_arm.externally_defined_type_qualifier ../characteristic/sys/4_info_reqs.htm#characteristic_arm.minimum_tolerance_characteristic ../characteristic/sys/4_info_reqs.htm#characteristic_arm.symmetrical_tolerance_characteristic ../characteristic/sys/4_info_reqs.htm#characteristic_arm.type_qualifier_subtypes ../characteristic/sys/4_info_reqs.htm#characteristic_arm.exclusive_property_value_representation_characteristic


Figure C.3 — ARM entity level EXPRESS-G diagram 2 of 2


© ISO 2018 — All rights reserved